Volume Fume Extraction Unit with Pre-HEPA, Maximum 2 Ports / 2 Stations

Hisco #: FA430-16-3021 MFG #: FA430-16
$625.07 Each-EA
Availability: 14 EA In Stock - ships within 24 hours
9 days 23.10 lbs per EA
1 Item must be ordered in multiples of 1
  • Product Info
  • The Hakko FA430-16 is a volume fume extractor unit with pre-HEPA, and maximum 2 ports/2 stations, no arms, 120W.

    Hakko FA430-16 Features:
    • Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts
    • Powerful suction, quiet operation
    • Three airflow adjustment modes: High, medium, low
    • Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located
    • Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter
    • HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case
    • Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter
    • Filter efficiencies are greater than 98% at 0.3 microns
    • Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel
    • Power consumption: 120W
    • Maximum air flow:
      • One port: 145 CFM (4.1 cu.m./min.)
      • Two ports: 167 CFM (4.7 cu.m./min.)
    • Noise level: 44-53 dB @1m
    • Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)
    • Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)
    NOTE: Not for use with flammable vapors