Industrial Adhesives Distributor

3M™ 4000UV Hybrid Adhesive Sealant Fast Cure

Resistant to weathering, saltwater, and stresses caused by joint movement. Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics above and below the waterline.

More Info

3M™ 540 Polyurethane Sealants

540 Polyurethane sealant is a one-component, moisture curing product which forms permanently elastic bonds. Available in cartridge or sausage pack.

More Info

3M™ Adhesive Applicators

Manual driven applicators designed for dispensing cartridges and 400ml and 600ml sausage packs.

More Info

3M™ Aerosol Adhesives

Industrial-grade spray adhesives for bonding various materials and surfaces.

More Info

3M™ Crystal Clear Sealant 230

230 is an excellent solvent-based thermoplastic cosmetic sealer.

More Info

3M™ Hybrid Sealant 730

730 is a clear cosmetic sealant with excellent UV resistance.

More Info

3M™ Inverted Aerosol Adhesives

Upside down spray technology for high-strength, fast-tack bonding to concrete, wood, MDF, laminates, and polyethylene.

More Info

3M™ Polyurethane Multi-Purpose Adhesive 5010

5010 is a fast grabbing, 100% solids, one-part polyurethane-based moisture curing adhesive.

More Info

3M™ Scotch-Weld™ Acrylic Adhesives

Two-part MMA acrylic-based adhesives, with mix ratios of 1:1. This group of products offer work life ranging from five to 25 minutes and handle strength from 10 to 40 minutes. Dispensed with 3M™ Scotch-Weld™ EPX™ Plus II Applicator.

More Info

3M™ Scotch-Weld™ Epoxy Adhesives

Toughened, two-part epoxy adhesives with mix ratios of 2:1. This group of products offer work life ranging from five to 60 minutes and handle strength up to four hours. Dispensed with 3M™ Scotch-Weld™ EPX™ Plus II Applicator.

More Info

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive

A toughened, two-part acrylic adhesive. 1:1 mix ratio, 10 minute work life and handling strength in 20 minutes. Dispensed with 3M™ Scotch-Weld™ EPX™ II Plus Applicator.

More Info

3M™ Silicone Lubricant

Lubricate moving parts, eliminate squeaks caused by friction, prevent sticking and freezing, and protect against rust.

More Info

3M Concrete Repair

Concrete Repair 600/DP600NS are self-leveling, two-component polyurethanes in standard caulk tubes.

More Info

Loctite 1 1/2 in Polypropylene Flexible Dispense Tips Helical Thread

More Info

Loctite 1 1/2 in Stainless Steel Tips Helical Thread

More Info

Loctite 1 1/4 in Polyethylene General Purpose Tapered Dispense Tips

More Info

Loctite 1 1/4 in Polyethylene Tapered Dispense Tips w/ UV Light Block Additive

More Info

Loctite 1 in Stainless Steel Tips Helical Thread

More Info

Loctite 1/2 in Stainless Steel General Purpose Dispense Tips

Full line of Loctite® brand dispense tips and syringe barrel components. Available in stainless steel, tapered polyethylene and flexible polypropylene tips. All feature a positive locking, helical thread design to ensure the tip will stay intact during application.

More Info

Loctite 1/2 in Stainless Steel Tips Helical Thread

More Info

Loctite 1/4 in Stainless Steel Tips Helical Thread

More Info

Loctite 45 degree by 1/2 in Stainless Steel Tips Helical Thread

More Info

Loctite 90 degree by 1/2 in Stainless Steel Tips Helical Thread

More Info

Loctite Black Max™ Instant Adhesive

Low viscosity, black, rubber toughened, one part, room temperature cure, instant adhesive designed for bonding metal, rubber and selected plastics. Excellent peel, impact and sheer strength.

More Info

Loctite Hysol® Kits

Loctite® Hysol® hot melt adhesives were developed to bond a variety of substrates, including difficult-to-bond plastics. These adhesives can handle today’s toughest applications in a broad range of industries. Loctite® Hysol® hot melts are ideal for applications that require high speed manufacturing, bonding versatility, very large gap filling, fast green strength, and minimal shrinkage. Loctite® Hysol® hot melts are solvent-free and contain environmentally-friendly materials with no harmful VOCs.

More Info

Loctite® 404™ Quick Set™ Instant Adhesive

For general maintenance and repair. Excellent for rubber bonding.

More Info

Loctite® All-Purpose Spray Adhesive

Bonds lightweight, porous, and non-porous surfaces. Allows for repositionable and permanent bonds. Fast drying: won’t shrink or bleed. Resists water and humidity. Contains no ozone-depleting compounds.

More Info

Loctite® Fast Cure Mixer Cups

Pre-measured epoxy mixer cups are ideally suited for applications requiring only a small amount of epoxy. Fills porosity and cracks. Adheres to metal, glass, wood, and hard plastics. Sets in 5 minutes. Gray.

More Info

Loctite® O-Ring Making Kit

Makes replacement, high-performance O-rings in less than a minute. This compact kit contains three-foot lengths of common diameters of Buna N cord, Loctite® 404™ Quick Set™ Instant Adhesive, O-ring fixture, blade, a waterproofing solution, and a cleanup solution. Available in Metric and Standard. Cut and splice tool and standard size cord stock is available.

More Info

Loctite Natural Syringe Barrel Kit – 10 ml

20 barrel caps, 40 pistons, 40 barrels, 40 barrel tips

More Info

Loctite Natural Syringe Barrel Kit – 30 ml

10 barrel caps, 20 pistons, 20 barrels, 20 barrel tips

More Info

Loctite Natural Syringe Barrel Kit – 55 ml

5 barrel caps, 10 pistons, 10 barrels, 10 barrel tips

More Info

Loctite Needle Variety Kit

This kit contains five each of an assortment of high-precision stainless steel tips in various lengths and gauges. Tapered and flexible dispense tips are also included. All dispense tips have helical thread Luer-Lok® hubs for reliable locking.

More Info

Loctite Prism® Instant Adhesives

Technology from Henkel Corporation has made the productivity promises of cyanoacrylate adhesives (instant adhesives) a reality with the industry’s widest selection of high-performance, application-specific, instant adhesives. Loctite® instant adhesives are available in a variety of viscosities, cure speeds, gap-filling capabilities, and substrate compatibilities. The ultra high-performance Loctite® Prism® family offers additional products that surpass the most stringent demands, including toughened formulations, low odor and low blooming products, and thermally resistant formulations.

More Info

Loctite Speedbonder® 324™

High impact, toughened, two-step, no-mixing required, amber adhesive. Loctite® 324™ is solvent resistant and, when used in conjunction with Loctite® Primer 7075™, is ideal for large gap applications. Offers the strength of an epoxy and the speed of an instant adhesive, fixturing in 5 minutes.

More Info

Loctite Super Bonder® 768™ Solvent

Parts cleaner that dissolves cured cyanoacrylate-based adhesives. It is used in the disassembly of parts and cleanup of dispensing equipment.

More Info

Loctite Super Bonder® Instant Adhesives

Technology from Henkel Corporation has made the productivity promises of cyanoacrylate adhesives (instant adhesives) a reality with the industry’s widest selection of high-performance, application-specific, instant adhesives. Loctite® instant adhesives are available in a variety of viscosities, cure speeds, gap-filling capabilities, and substrate compatibilities.

More Info

Loctite Syringe Barrel Kit for UV Adhesives – 10 ml

20 barrel caps, 40 pistons, 40 barrels, 40 barrel tips

More Info

Loctite Syringe Barrel Kit for UV Adhesives – 30 ml

10 barrel caps, 20 pistons, 20 barrels, 20 barrel tips

More Info

Loctite Syringe Barrel Kit for UV Adhesives – 55 ml

5 barrel caps, 10 pistons, 10 barrels, 10 barrel tips

More Info

Loctite Syringe Starter Kit

5 barrel caps, 5 pistons, 4 clear barrels, 1 black barrel, 5 tips, 1 air line adapter

More Info

Loctite Tak Pak® Adhesive System

Single part, fast curing cyanoacrylate adhesives formulated for electronics applications. Designed to use with TAK PAK® Accelerators to attain instant cures for tacking electronics components. Typical applications include wire tacking to coil forms; tamper proofing adjustable components; mounting standoffs, edge guides and stiffeners to circuit boards.

More Info

Techspray Conformal Coating Remover Pen

Removes conformal coating for rework and repair.

More Info

Techspray Slic™ Silicone Lubricant

Hydrocarbon-based lubricant is an effective and economical solution. Is safe on plastic, displaces water and waterproofs.

More Info

Techspray Turbo-Coat Acrylic Conformal Coating

Built for speed! Turbo-Coat is designed to speed up board production throughput without additional investment of expensive UV systems. Dries tack-free in three minutes. Full cure achieved in ten minutes with elevated temperatures.

More Info

Chemtronics CircuitWorks® BA Dispensing Pens

These empty pens are for easy filing, dispensing and applying all types of liquids; fluxes, cleaning solvents, oils, etc. Tough and durable body, valve and nib.

More Info

Chemtronics CircuitWorks® Conductive Epoxy

This conveniently packaged silver epoxy is for precision repairs and high-strength conductive bonding; quick, solderless electronic connections. Mixed material provides five minute work time and fast cure.

More Info

Chemtronics CircuitWorks® Conductive Grease

This syringe dispenser is for precise application of grease to provide superior electrical and thermal conductivity, lubrication and protection against moisture and corrosion.

More Info

Chemtronics CircuitWorks® Conductive Pen

This pen dispenser is for drawing highly conductive silver traces, jumpers and shielding with precision and control.

More Info

Chemtronics CircuitWorks® Heat Sink Grease

This tube dispenser is for precise application of silicone compound that facilitates heat transfer away from electronics and electrical components. Thermally stable from -40°F to 342°F. Meets MIL-DTL-47113D Type I.

More Info

Chemtronics CircuitWorks® Overcoat Pen Green

This pen dispenser is for precise application of a touch protective acrylic conformal coating.

More Info

Chemtronics DPL® Deep Penetrating Lubricant

This deep penetrating lubricant is formulated to displace moisture, inhibit corrosion, reduce friction and protect metal surfaces.

More Info

Chemtronics HD Silicone Lubricant

This electrical food-grade silicone lubricant is formulated to lubricate, waterproof and protect plastic, rubber and metal surfaces.

More Info

Chemtronics Konform® Conformal Coatings

Konform® Conformal coatings protect printed circuit boards, components and flex circuitry from damage. They contain a UV indicator for improved quality assurance and are free of upper ozone depleting compounds and substances. They offer high dielectric strengths of 1100 volts/mil or more. The clear, tough, transparent coatings will not fragment, chip or crack, thereby providing excellent protection. All are convenient and ready to use – no mixing is required.

More Info

Jensen Global 1 1/2 in IT Series Standard Needles

More Info

Jensen Global 1 in IT Series Standard Needles

More Info

Jensen Global 1/2 in IT Series Standard Needles

More Info

Jensen Global 5/16 in IT Series Standard Needles

These IT Series economical dispensing tips are color coded based off the international standard and feature luer lock hubs and 304 stainless steel tubing.

More Info

Jensen Global Adapters Equipment

Jensen Global manufactures high quality air syringe adapters that are designed to fit their air barrels and come with a standard barb fitting or white fitting for their JGD500S.

More Info

Jensen Global Air Syringes

Jensen's high quality air syringe barrels and stoppers are sold in convenient pre-packaged boxes or in economical bulk cases.

More Info

Jensen Global Dispensing Bottles

Bottles are made of LDPE and the unique luer lock cap allows the user to attach a luer lock tip to dispense various materials directly from the bottle.

More Info

Jensen Global Foot Pedal Equipment

Pneumatic foot valve dispensers provide an effective way to dispense materials accurately and ergonomically.

More Info

Jensen Global IT Series Tapered Needles

Made of polypropylene, these tips feature a luer lock hub and tapered design to reduce material back pressure with viscous materials.

More Info

Jensen Global IT Series Tip Cap

Made of polypropylene, these luer lock caps are designed to seal off syringe and luer lock bottle caps when not in use.

More Info

Jensen Global Manual Syringes

Offered in a wide range of sizes, these manual syringes come in convenient bags and are marked with calibrations.

More Info

Jensen Global Shot Meter Equipment

This compact digital dispenser provides highly accurate repeatable deposits of a wide range of materials.

More Info

Jensen Global Static Mixers

Mixing nozzles are used with dual epoxy cartridges and provide an accurate way to mix material together while dispensing.

More Info

LPS Cold Galvanize

Provides a smooth uniform coating that performs like a hot dip galvanize to prevent rust and corrosion on all types of metals for up to three years. It provides a tough, flexible coating that will not crack or peel even in extreme heat or cold. Dries in 3-5 minutes and withstands water temperature up to 212°F (100°C) and continuous dry heat up to 750°F (400°C). Cold Galvanize works as a paint primer over rust.

More Info

LPS Food Grade Silicone

Ideal for food processing and food handling applications. It has a dry film which will not attract dust or dirt. It meets the NSF regulations for H1 and the FDA requirements for incidental food contact. Food Grade Silicone Lubricant is ideal for releasing molded parts and for applications in high temperature environments. It is fast evaporating and does not contain chlorinated solvents.

More Info

LPS 1® Premium Lubricant

Moisture displacement, ideal for drying out electrical/electronic components and delicate mechanisms. The dry, thin, lubricating film resists oil, dust and dirt build-up while providing a short term, light, corrosion-resistant barrier. Its fast penetration helps loosen rusted or frozen parts. LPS 1® is safe on paint and most plastics. Used worldwide in aviation.

More Info

LPS 2® Heavy-Duty Lubricant

Multi-purpose lubricant and penetrant with added corrosion protection. It forms a long-lasting, oily film lubricant which reduces wear caused by friction and corrosion. Excellent protective coating for hand and machine tools, parts, and equipment. Providing up to one year of corrosion protection, LPS 2® can be used on indoor and outdoor equipment and is safe on paint and most plastics.

More Info

LPS 3® Premier Rust Inhibitor

Protects metal parts stored indoors for up to two years. Forms a soft, self-healing, waxy film that acts as an effective barrier, sealing out moisture, acid, dirt, sand, dust and other corrosive elements which also provides non-sling lubrication. It is safe to use on most surfaces and does not contain any chlorinated solvents or silicone. It is non-conductive and non-staining.

More Info

LPS Nickel Anti-Seize

An extreme temperature lubricant for use in hostile environments and extreme temperatures. It protects against rust and corrosion and prevents seizures up to 2600⁰F (1427⁰C). Nickel Anti-Seize is acid resistant and will not run, drip, or settle out. It does not contain lead, copper, or graphite. Silver color.

More Info

LPS ThermaPlex® Bio Green Bearing Grease

Environmentally responsible, premium performance, biodegradable grease. This is an NLGI 2 grease that prolongs bearing life and provides outstanding extreme pressure performance, superior rust and corrosion protection, and exceptional water resistance. Qualified to the USDA Biopreferred program.

More Info

LPS ThermaPlex® CS Moly Bearing Grease

Premium performance, calcium sulfonate grease that is enhanced with molybdenum disulfide. CS Moly is an NLGI 2 grease that reduces wear from vibration and prolongs bearing life. Contains very high load carrying capacity, superior water resistance, and provides excellent rust and corrosion protection.

More Info

LPS TKX® All-Purpose Lubricant

All purpose, non-conductive lubricant which displaces moisture, loosens rusted or frozen parts and protects metal against corrosion. Does not contain chlorinated solvents or silicones and is safe to use on most surfaces. Has a high flash point of 175°F (79°C). TKX® has an Inverta Spray Valve which allows you to spray in an upright or inverted position.

More Info

Electronic & Industrial Adhesives