Electronic Assembly Cleaners – Circuit Board Cleaners

Petroferm Acid Acceptance Chemical Test Kit

Acid Acceptance Test Kit Petroferm for lenium Solvents (1 Kit) HAZMAT

More Info

AEROWAX MT is a highly refined plating maskant wax with a melting point range of 168-180°F (76-82°C) and effectively masks both simple and complex geometries and is suitable for hard chrome, nickel sulfamate and other selective plating applications.

AEROWAX MT is designed to be easily removed using Petroferm’s BIOACT® 280 Series, a group of water-rinsable, bio-based dewaxing solvents. Designed to operate in heated immersion equipment, this series exhibits excellent wax loading properties (up to 40%), very low volatility and are suitable replacements for trichloroethylene (TCE), methylene chloride (MeCl), caustic cleaners, petroleum-derived solvents and hot oils.

More Info

Petroferm AXAREL® 1000 MIL-PRF-680 Type I Cleaner

AXAREL® 1000 MIL-PRF-680B Type I solvent. Fast drying, all-purpose cleaner with very low odor and vapor pressure (<1 mm Hg). Drop-in replacement for highly flammable solvents such as acetone and IPA. Suited for manual or immersion cleaning.

More Info

Petroferm AXAREL® 1000 Pre-Saturated Wipes

AXAREL® 1000 Wipes combine the solvency, low odor and fast dry times of AXAREL 1000 Precision Solvent in a package that is convenient, economical and easy-to-use.

In addition to their exceptional performance, AXAREL 1000 Wipes exhibits very low volatility which assists in lowering VOC emissions, fire risk and total cost of ownership. They are the ideal replacement for acetone, isopropyl alcohol (IPA), mineral spirits, PD-680 solvents and other toxic, low-flash point solvents. Safe for use on all alloys and most polymers, AXAREL 1000 Wipes effectively removes greases, hydraulic fluids, mineral oils, lubricants, coolants, synthetics, and particulate matter.

AXAREL 1000 Precision Solvent is approved by Airbus, Boeing, Honeywell Aerospace, Lockheed Martin, United Airlines and qualified to US Department of Defense MIL-PRF-680 (Type I) solvent degreasing specification.

More Info

Petroferm AXAREL® 2000 MIL-PRF-680 Type II Cleaner

AXAREL® 2000 MIL-PRF-680B Type II solvent. Low-odor with a slightly higher flash point (144°F) (62°C) than AXAREL 1000. Used for manual or immersion cleaning and is suitable for vacuum hydrocarbon equipment. Excellent drop-in for mineral spirits, PD-680 solvents.

More Info

Petroferm AXAREL® 2200 Cleaner

AXAREL® 2200 is a high-performance electronics cleaner designed for hand-wipe and immersion applications. This proprietary cleaner is based on a mixture of highly-refined, polar and non-polar solvents.

AXAREL® 2200 is formulated to quickly remove uncured Surface Mount Device (SMD) adhesive and unreflowed solder paste from stencils and misprinted assemblies. It also effectively removes no-clean, water-soluble and rosin solder paste and flux residues as well as tape residues. It may be a suitable replacement for isopropyl alcohol (IPA), d-limonene, hydrocarbons, hydrofluoroethers (HFEs), hydrofluororcarbons (HFCs), HCFC-141b and HCFC-225.

More Info

Petroferm AXAREL® 3000 MIL-PRF-680 Type III Cleaner

AXAREL® 3000 MIL-PRF-680 Type III solvent. High flash point degreaser with corrosion protection. It is selected when a non-hazardous cleaner with powerful solvency, a high flash point, very low odor and low non-volatile residue (NVR) is required.

AXAREL® 3000 is formulated to effectively remove a wide range of soils such as heavy greases, mineral oils, lubricants, coolants, synthetics, waxes and particulate matter. Additionally, it is safe for use with ferrous and non-ferrous alloys such as aluminum, copper and copper alloys, magnesium, nickel, steel, stainless steel, titanium and zinc. It is also compatible with many polymeric substrates and elastomers.

More Info

Petroferm AXAREL® 32 Defluxer

AXAREL® 32 is formulated for removing rosin, no-clean and lead-free solder paste and flux residues. Easy rinsing. Separates for water recycling. Water-rinsable cleaner, selected for its excellent solvency, easy rinsing, high soil loading, temperature flexibility and process versatility. It effectively removes ionic contamination and high temperature solder flux residues from Surface Mount Devices (SMDs) and other electronic components.

AXAREL® 32 offers excellent compatibility with most substrates and materials used in electronic assembly cleaning applications. It is not recommended for use with RTV silicones, polystyrenes or polycarbonates. It is supported by a global network of technical representatives, capable of solving the industries most difficult cleaning applications and does not contribute to ozone depletion and its components are approved by the EPA’s Significant New Alternatives Policy (SNAP) as an alternative to ozone depleting substances.

More Info

Petroferm AXAREL® 36 Defluxer

AXAREL® 36 is Formulated for removing rosin, no-clean, lead-free solder paste and flux residues. Separates quickly for water recycling and is also selected for its ability to quickly and completely separate from water in the rinse section, providing high levels of solvent recovery and recycling. For applications requiring easy water rinsing, AXAREL® 32 is recommended.

AXAREL® 36 effectively removes ionic contamination and high temperature solder flux residues from Surface Mount Devices (SMDs) and other electronic components.
and offers excellent compatibility with most substrates and materials used in electronic assembly cleaning applications. It is not recommended for use with RTV silicones, polystyrenes or polycarbonates.

More Info

Petroferm AXAREL® 4000 MIL-PRF-680 Type IV Cleaner

AXAREL® 4000 MIL-PRF-680B Type IV blended cleaner. Strongest of all four types. Mild citrus odor. Removes heavy greases, hydraulic fluids and oils. Replaces P-D-680 solvents and is direct replacement for acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK),
toluene and other low-flash point, flammable materials. It may also be an effective alternative to halogenated solvents and caustic cleaners.

AXAREL® 4000 is a high-purity blended cleaner designed to provide the highest soil removal capability of all four types of MIL-PRF-680 solvents and is safe for use with ferrous and non-ferrous alloys such as aluminum, copper and copper alloys, magnesium, nickel, steel, stainless steel, titanium and zinc. It is also compatible with many polymeric substrates and elastomers.

More Info

Petroferm AXAREL® 4100 Cleaner

AXAREL® 4000 fast drying cleaner designed to remove greases, hydraulic fluids, lubricants and metalworking fluids. Aerospace approvals. Highly versatile solvent cleaner designed for manual cleaning and immersion applications. This proprietary cleaner is a mixture of modified alcohols and refined hydrocarbons. Formulated with a broad range of solvency, selected to remove soils with both polar and non-polar characteristics. It effectively removes greases, mineral oils, coolants, synthetics and other metalworking fluids.

AXAREL 4100 is safe for use with ferrous and non-ferrous alloys such as aluminum, copper and copper alloys, magnesium, nickel, steel, stainless steel, titanium and zinc. It is also compatible with many polymeric substrates and elastomers. It is a direct replacement for acetone, isopropyl alcohol (IPA), methyl ethyl keton (MEK), toluene and other low-flash point, flammable materials. It may also be an effective alternative to halogenated solvents and caustic cleaners.

More Info

Petroferm AXAREL® 550 Neutral pH Inline Defluxer

AXAREL® 550 This powerful cleaner is designed for use aqueous inline spray-in-air cleaning equipment at low concentrations to improve the removal of most Water Soluble flux residues. This is a proprietary blend of modified alcohols and surfactants. It offers excellent compatibility with most substrates and materials used in electronic assembly cleaning applications.

More Info

Petroferm AXAREL® 56 Cleaner

AXAREL® 56 Precision Cleaner is a blend of highly-refined mixed aliphatic hydrocarbons and esters formulated to offer the ideal balance of selective solvency, high flash point, and low toxicity. It is a semi-aqueous cleaning agent suitable for removing a wide variety of soils in immersion cleaning applications. Designed to promote superior water rinsing of cleaned articles. The product allows for excellent separation of the cleaning agent and dissolved soils from the rinse water. This product contains no rust inhibitors, making it ideal for special applications requiring minimum residues. If a rust inhibitor is desired, use AXAREL® 52.

More Info

Petroferm AXAREL® 6100 Cleaner

AXAREL® 6100 Precision Cleaner is a blend of aliphatic hydrocarbons formulated to offer an excellent combination of low-odor, minimum residue, and a broad range of solvency. It is a non-aqueous cleaning agent suitable for removing a wide variety of soils in immersion or hand-wipe cleaning applications. It is Ideal when a manual cleaner with a flash point over 141°F/61°C is required. Moderate dry times. Removes greases, hydraulic fluids, lubricants and oils. Aerospace approvals.

AXAREL® 6100 was developed so that it evaporates rapidly, leaving no residue on the substrate surface to interfere with subsequent processing of the parts. The product is normally selected over AXAREL 4100 when a higher flash point and slower evaporation rate are desired. It is a direct replacement for 1,1,1-trichloroethane and other low flash point, flammable materials.

More Info

Petroferm AXAREL® 700 Traditional Inline Defluxer

AXAREL® 700 Traditional Inline Defluxer is the cleaner of choice when removing the most tenacious flux residues in aqueous inline spray-in-air cleaning equipment. This proprietary cleaner is based on mixture of solvents, saponifiers and surfactants with an advanced defoaming package, preventing the formation of foam due to water-soluble masking agents and flux residues. It is a low-foaming cleaner, selected to remove a broad range of lead-free and lead-based rosin, no-clean and water-soluble flux residues from circuit assemblies.

More Info

Petroferm AXAREL® 750 Multipass Inline Defluxer

AXAREL® 750 Multipass Inline Defluxer This one of its kind cleaner is specifically designed for assembly processes that require multiple cleaning cycles in aqueous inline spray-in-air cleaning equipment. This inherently low foaming proprietary cleaner is a mixture of water-dilutable solvents, specialty saponifiers and corrosion inhibitors. It does not require any anti-foaming agents or other additives to maintain performance.

AXAREL 750 effectively removes solder flux residues from leading paste suppliers such as AIM, Alpha/Cookson, Heraeus, Indium, Kester, Qualitek, Senju and Umicore.

More Info

Petroferm AXAREL® 850 Low Concentration Inline Defluxer

AXAREL® 850 Low Concentration Inline Defluxer. This novel cleaner is specifically designed to be used in aqueous inline spray-in-air cleaning equipment at low concentrations to improve the removal of most Water Soluble flux residues under low standoff heights (as low as 1 mil). The inherently low foaming characteristics of this proprietary cleaner allow it to be used effectively at concentrations of 3-5% without the need of anti-foaming agents or other additives.

More Info

Petroferm AXAREL® 9100 Cleaner

AXAREL® 9100 Blended solvent cleaner ideal for heated immersion cleaning. Very high flash point, essentially odorless. Aerospace approvals. Approved MIL-PRF-680B Type III solvent cleaner designed for hand-wiping and immersion applications. It may also be used as a solvating agent in co-solvent and bi-solvent vapor degreasing.

AXAREL 9100 is formulated to effectively remove a wide range of soils such as greases, mineral oils, lubricants, coolants, synthetics, and particulate matter. It is safe for use with ferrous and non-ferrous alloys such as aluminum, copper and copper alloys, magnesium, nickel, steel, stainless steel, titanium and zinc. It is also compatible with many polymeric
substrates and elastomers. This product functions as a direct replacement for acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), toluene and other low-flash point, flammable materials. It may also be an effective alternative to halogenated solvents and caustic cleaners.

More Info

Petroferm AXAREL® NF Defoamer

AXAREL® NF Defoamer is a nonionic, silicone-free surfactant with superior washability and stability is desinged for use in electronics cleaning applications. It eliminates undesired foam and prevents its reformation in today's popular water-only electronics cleaning processes.

More Info

Petroferm BIOACT® 105 Cleaner

Fast drying, manual cleaner approved by all leading OEMs. Widely used alternative to solvents with high flammability or toxicity including acetone, IPA, MEK, MPK. Removes very difficult soils and is excellent for surface preparation.
Available in pre-saturated wipes.

More Info

Petroferm BIOACT® 108 Cleaner

Powerful, solvent cleaner approved for aircraft components and structures as well as insulation blanket material. Also effective for cleaning prior to bonding, sealing, painting. Replaces MEK and MPK and removes adhesives, CICs, greases, oils, sealants, silicones, waxes.

More Info

Petroferm BIOACT® 120 Cleaner

More Info

Petroferm BIOACT® 145 Cleaner

Fast dry times for a cleaner with a flash point over 141°F/61°C (non-hazardous). Removes metalworking fluids such as mineral oils, water-soluble oils, coolants, synthetics. Good on polar soils. Aerospace approvals.

More Info

Petroferm BIOACT® 200 Cleaner

More Info

Petroferm BIOACT® 280 Cleaner

World's most popular TCE alternative for removing plating, fixturing and blocking waxes. dewaxing solvent. Designed for heated immerison applications. Water-rinsable, bio-based. Aerospace approved.

More Info

Petroferm BIOACT® 280E Cleaner

TCE alternative for removing plating, fixturing and blocking waxes. dewaxing solvent. Designed for heated immerison applications. Water-rinsable, bio-based. Aerospace approved.

More Info

Petroferm BIOACT® AE-O Adhesive & Mastic Remover

A citrus terpene-based biodegradable solvent blended with surfactants. Water soluble and rinseable.

More Info

Petroferm BIOACT® AR-405 Asphalt Release Agent

Biodegradable truck bed coating designed to provide quick release for hot mix without affecting the integrity of typical asphalt concrete and polymer-modified asphalt. It also prevents asphalt and rubber from adhering to silo doors, drum rollers, tools and manhole covers.

More Info

Petroferm BIOACT® EC-15TM Defluxer

Formulated to remove high temperature lead-free solder paste and flux residues. Very low emissive loss and very high flash point.

More Info

Petroferm BIOACT® EC-78 Batch Defluxer

This cleaner is designed for aqueous batch spray-in-air cleaning equipment. This inherently low foaming proprietary cleaner is a mixture of water-dilutable solvents, specialty saponifiers and corrosion inhibitors which make it ideally suited for use at high temperatures and with extended wash cycles. It does not require any anti-foaming agents or other additives to maintain performance.

More Info

Petroferm BIOACT® EC-7M Defluxer

The USDA Certified Biobased Product Label verifies that this cleaner is made up of 100% renewable biobased ingredients. It is designed to remove solder paste and flux residues without rinsing. Can also remove uncured SMD adhesives and is very low NVR.

More Info

Petroferm BIOACT® EC-7R Defluxer

World's most popular semi-aqueous defluxer since 1991. The USDA Certified Biobased Product Label verifies that this cleaner is made up of 99% renewable biobased ingredients. It removes rosin and no-clean solder pastes and flux residues. Easy rinsing and separates quickly for water recycling.

More Info

Petroferm BIOACT® EC-88 High Performance Inline Defluxer

This cleaner is designed for aqueous inline spray-in-air cleaning equipment. This inherently low foaming proprietary cleaner is a mixture of water-dilutable solvents, specialty saponifiers and corrosion inhibitors. Unique features of this cleaner include superior residue removal while protecting surface finishes and exceptionally long bath life. It does not require any anti-foaming agents or other additives to maintain performance.

More Info

Petroferm BIOACT® EC-98 Ultrasonic Defluxer

This cleaner is designed for aqueous ultrasonic cleaning equipment. This proprietary cleaner is a mixture of water-dilutable solvents, specialty saponifiers and corrosion inhibitors formulated for optimal cleaning and energy utilization.

More Info

Petroferm BIOACT® EC-ULTRA® Defluxer

Ideal for odor-sensitive environments. Formulated for rosin/resin flux residues. Bio-based, very low emissive loss, and high flash point.

More Info

Petroferm BIOACT® MSO Cleaner

More Info

Petroferm BIOACT® PCG Cleaner

More Info

Petroferm BIOACT® SC-10 Cleaner

Ideal alternative for isopropyl alcohol (IPA). Better than IPA in removing solder paste and flux residues, uncured SMD adhesive and ionic contamination including fingerprints. Eliminates white residue. Exceptional polarity, broad-based solvency.

More Info

Petroferm BIOACT® SC-10E Cleaner

Designed to clean solder paste and uncured SMD adhesive from stencils without water rinse. Exceptional polarity and broad-based solvency.

More Info

Petroferm BIOACT® SC-10E PLUS Cleaner

More Info

Petroferm BIOACT® SC-22 Cleaner

Multi-purpose product designed to work well in wide variety of equipment applications. Highly effective in removing solder pastes and flux residues as well as uncured SMD adhesives. Does not require rinsing. May be diluted for use in aqueous processes.

More Info

Petroferm BIOACT® VSO Cleaner

Designed for 3D model making equipment clean-up.

More Info

Petroferm CleanSafe™ 40 Aqueous Cleaner

More Info

Petroferm CleanSafe™ 50E PLUS Aqueous Cleaner

Designed to clean and brighten copper and copper alloys. Inhibits oxidation.

More Info

Petroferm CleanSafe™ 585 Aqueous Cleaner

Ideal for ultrasonic and soak cleaning. Removes greases, oils, lubricants, buffing and polishing compounds and particulates. Excellent substrate compatibility, hard-water stable, corrosion protection.

More Info

Petroferm CleanSafe™ 686 Aqueous Cleaner

CleanSafe 686 Aqueous Cleaner is a multi-metal aqueous cleaner designed for cleaning and degreasing. Suitable for use in immersion equipment, it offers the following benefits. 1) Demonstrated Cleaning Ability, 2) Materials Compatibility, 3) Environmental Acceptance, 4) Long Bath Life, 5) Easy to Operate and Control

More Info

Petroferm CleanSafe™ 7200 DTX Aqueous Cleaner

All purpose cleaner with enhanced copper and copper alloy corrosion inhibitors. Long bath life, low-foaming, low VOCs.

More Info

Petroferm CleanSafe™ 7440 REX Aqueous Cleaner

More Info

Petroferm CleanSafe™ 7441 BLDS Aqueous Cleaner

More Info

Petroferm CleanSafe™ 7448 Aqueous Cleaner

Ideal for removing very difficult soils and scale from carbon steel, stainless steel and titanium. Low-foaming. SCAQMD approved.

More Info

Petroferm CleanSafe™ 7449 YHA Aqueous Cleaner

Ideal for removing very difficult soils from aluminum and carbon steels. Low foaming.

More Info

Petroferm CleanSafe™ 787 Aqueous Cleaner

VOC-free cleaner designed for spray-in-air and agitated immersion equipment. Excellent substrate compatibility, no APE/NPEs, low-foaming.

More Info

Petroferm CleanSafe™ 787C Aqueous Cleaner

Unique, non-foaming aqueous cleaner designed for exterior aircraft surfaces, spray washers, agitated tank systems. Safe on metals and composites including faying surfaces. Non-scaling.

More Info

Petroferm CleanSafe™ 7950 Aqueous Cleaner

More Info

Petroferm CleanSafe™ 9413 Aqueous Cleaner

Designed to clean and brighten copper and other cupric metals. Low foaming.

More Info

Petroferm CleanSafe™ 9440 Aqueous Cleaner

Designed to clean, deoxidize and remove rust. Etches aluminum. Low foaming

More Info

Petroferm HYDREX® A-PLUS Aqueous Cleaner

Aqueous immersion cleaner designed for heated stencil and misprint cleaning applications. Removes SMD adhesives and solder pastes. Neutral pH. Low odor. Non-flammable.

More Info

Petroferm HYDREX® LF Aqueous Cleaner

Agressive MEA-based aqueous defluxer. This low foaming saponifer is designed to remove lead-free rosin, no-clean and water-soluble solder pastes and flux residues.

More Info

Petroferm HYDREX® SP Aqueous Cleaner

Designed for heated spray stencil and misprint cleaning. Removes solder pastes and SMD adhesives. Neutral pH, low VOC, low odor, non-flammable, and OSP-friendly.

More Info

Petroferm HYDREX® SP-50 Aqueous Cleaner

Designed for heated spray stencil and misprint cleaning as well as defluxing. Neutral pH, non-flammable, and OSP-friendly.

More Info

Petroferm HYDREX® WS Aqueous Cleaner

Formulated to remove solder pastes and hard-to-clean uncured SMD adhesives without water rinsing. Approved for underwipe systems. Neutral pH, low odor. Non-flammable.

More Info

Petroferm LENIUM® DF Silicone Deposition Fluid

More Info

Petroferm LENIUM® ES Vapor Degreasing Solvent

Very popular azeotrope of n-propyl bromide (nPB) and isopropyl alcohol (IPA) for vapor degreasing. Designed to remove solder paste and flux residues as well as ionic contamination from circuit assemblies and microelectronics. Also removes metalworking fluids and MIM debinding agents. Aerospace approvals.

More Info

Petroferm LENIUM® FEC

Vapor degreasing solvent designed to remove solder paste and flux residues as well as ionic contamination from circuit assemblies and microelectronics. Higher TLV than LENIUM ES and non-ozone depleting. Contains no chlorinated or brominated solvents.

More Info

Petroferm LENIUM® FHD

Vapor degreasing solvent with low health and environmental impact (non-ozone depleting). Reduces exposure concerns common with TCE, PERC, MeCl, nPB. Approved by Boeing, Goodrich, Lockheed-Martin. Also selected for manual cleaning operations requiring low surface residue and very fast evporation.

More Info

Petroferm LENIUM® FRA

Fluorinated rinsing agent in co-solvent and bi-solvent vapor degreasing. Non-ozone depleting, excellent plastic compatibility and high TLV. Contains no chlorinated or brominated solvents.

More Info

Petroferm LENIUM® GS Vapor Degreasing Solvent

Powerful, nPB-based vapor degreasing solvent. Drop-in replacement for TCE, PERC, HCFCs. Used to clean a wide range of components including breathing oxygen systems. Approved by Bell Helicopter, Boeing, Lockheed-Martin, Safran, Scott Aviation.

More Info

Petroferm LENIUM® RV Extractant and Recovery Solvent for Asphalt Cement

More Info

Petroferm LENIUM® TS Silicone Tube Swelling Fluid

More Info

Petroferm NPB Super Booster

Stabilizer package for LENIUM ES, LENIUM GS and LENIUM XS. Prevents acidic conditions as a result of nPB decomposition. Only approved for LENIUM nPB branded products.

More Info

Petroferm RE-ENTRY® PREPSOLV

100% bio-based citrus cleaner designed for interior and exterior aircraft structures. Effectively removes adhesives, CICs, greases, sealants.

More Info

Petroferm RustSafe™ 2400

Solvent-based, water-displacing corrosion inhibitor. Long-term protection.

More Info

Petroferm RustSafe™ 27 SDST

Water-based corrosion inhibitor. Medium-term protection.

More Info

Petroferm ScaleSafe™ 9430 Descaler

This mildly acid liquid descaler is designed for the removal of mineral deposits and other scale from the wetted surfaces of aqueous washers such as spray nozzles, heating elements, belts, screens, viewing windows, and tank surfaces.

More Info

Petroferm SOLVAG™ SA-24

Heavy duty solvent designed specifically for co-solvent and bi-solvent vapor degreasing. Removes baked-on flux residues as well as polar soils.

More Info

Petroferm SOLVAG™ SA-70

Low-odor solvating agent designed for co-solvent and bi-solvent vapor degreasing. Removes flux residues, oils and other polar soils.

More Info

3M Doodlebug™ Pad Holders

Holds 3M™ Doodlebug™ pads, sponges and brushes without the use of adhesives or fasteners. Attaches to standard threaded broom handle.

More Info

3M Doodlebug™ Scrub Pads

Fits 3M™ Doodlebug™ pad holder 6472 or 6473.

More Info

3M Dose 'n Fill Cleaning System

Each kit contains a ready-to-use quart, one dosing cartridge with concentrate, and free storage caddy.

More Info

3M Easy Trap Duster

For dust, dirt and sand removal.

More Info

3M Scotch-Brite™ Easy Erasing Pad

Soft, flexible pad cleans many surfaces and is safe for indirect food contact areas. Innovative white polymeric foam erases hard-to-clean stains, marks and scuffs. Unique blue urethane layer provides durability and keeps hands away from messes. 4004CC.

More Info

3M Scotch-Brite™ Scouring Pad 96

Use this non-rusting pad for everyday cleaning of most cooking utensils and equipment. It replaces steel wool and metal sponges without leaving metal slivers in hands or food.

More Info

3M Scotch-Brite™ Scrub Sponge 74

Medium-duty, dual-action cleaning tool with a no. 96 scouring pad for scrubbing and cleaning and a cellulose sponge for quickly wiping up spills and messes.

More Info

3M Sharpshooter™ Mark Remover

No-rinse formula cleaner for quick, easy removal of soil and grease. This powerful cleaner penetrates and loosens buildup quickly.

More Info

3M Stainless Steel Cleaner & Polish

Ideal for stainless steel, chrome, laminated plastics and aluminum surfaces. With a high-gloss formula, it wipes clean with no streaks or buildup; resists fingerprints and masks surface blemishes. Pleasant lime fragrance.

More Info

Techspray Anti-Static Freezer

Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions.

More Info

Techspray Asahiklin AK-225

Non-flammable, high precision cleaner that is ideally suited for the most sensitive rubbers and plastics that are prone to swelling. 100% AK225, which is a VOC exempt cleaner.

More Info

Techspray Blue Shower II Cleaner/Degreaser

Non-flammable, high precision cleaner that is ideally suited for sensitive plastics often used in seals and outer casings.

More Info

Techspray Cotton Cleanroom Wipe

Hydroentangled cotton wipe has high absorbency with extra low particulate and chemical extractables. For Class 5 or higher cleanrooms. Ideal for stencil cleaning.

More Info

Techspray Ecoline Blue Shower Cleaner/Degreaser

Hydrocarbon-based cleaner formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials.

More Info

Techspray Ecoline Flux Remover

Hydrocarbon-based defluxer formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials.

More Info

Techspray Economy Blue Wipe

Maintenance wipe that is highly absorbent, tear resistant and low linting.

More Info

Techspray Eco-Oven™ Cleaner

Cleans reflow ovens, wave soldering systems and heat exchanger systems by removing all types of flux residues. Fast acting, more effective and safer than IPA for baked-on residues. Non-flammable and biodegradable with low VOC and zero GWP.

More Info

Techspray Eco-Shine™ Glass & Surface Cleaner

Cleans glass, stainless steel, chrome, mirrors, tile, plastic, ceramic and enamel, leaving a streak-free finish. Removes fingerprints and light oils. Made from natural, sustainable ingredients. Low VOC and zero GWP.

More Info

Techspray Eco-Shower™ Cleaner & Degreaser

Innovative water-based formula uses natural ingredients like citrus and soy oils to soak in and quickly cut through oil and grease. Cleans heavy oil and grease. Also good for cleaning polished stainless steel and removing adhesive and ink. Non-flammable and biodegradable with low VOC and zero GWP.

More Info

Techspray Eco-Stencil™ Cleaner

Removes all types of solder paste and uncured adhesive from screens, misprinted boards and equipment. Safe on stencils, squeegees and equipment surfaces. Non-flammable and biodegradable with low VOC and zero GWP.

More Info

Techspray Electronic Maintenance Cleaner

Non-flammable, strong cleaner ideally suited for metal cleaning. Can also be used as a defluxer when soldering components.

More Info

Techspray Envi-Ro-Tech 1679

Alcohol-based general duty defluxer and all-purpose cleaner for light oils, silicones, waxes, greases and contaminants found in electronics manufacturing.

More Info

Techspray Flux Remover AMS

Non-flammable, high precision flux remover that is ideally suited for sensitive plastics often used in packaging.

More Info

Techspray Foam Techswabs

Precisely designed, manufactured and packaged to serve a wide variety of cleaning and maintenance needs. Cotton swabs are the most economical choice for high volume usage. Foam swabs are ideal for more precision cleaning where linting needs to be avoided.

More Info

Techspray Freeze Spray

Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions.

More Info

Techspray G3 Blue Shower Cleaner/Degreaser

Patented non-flammable cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials.

More Info

Techspray G3 Contact Cleaner

Patented contact cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials.

More Info

Techspray G3 Flux Remover

Patented defluxer formulated to be powerful and non-flammable, yet economical. Eliminates brushing and scrubbing, saving time and materials.

More Info

Techspray G3 Flux Remover - Bulk

Powerful, non-flammable bulk cleaner that is ideal for manual cleaning of R, RA and no clean fluxes.

More Info

Techspray G3 Industrial Maintenance Cleaner

For all types of degreasing, metal cleaning, contact cleaning, and other maintenance cleaning. Quickly blasts off oils, greases, silicones, dirt and grime. Rapid evaporation and low toxicity compared to TCE, nPB and Perc.

More Info

Techspray G3 Kleen-It Cleaner/Lubricant

Patented, non-flammable G3 formula cleans oxides, grease, and other contamination as it lubricates. • Non-Flammable • Cleans as it Lubricates • Displaces Water • Waterproofs

More Info

Techspray G3 No-Clean Flux Remover

The power of G3, but specifically formulated to avoid and clean white residues caused by no-clean fluxes.

More Info

Techspray Glass Cleaner

Foaming, non-streaking glass, plastic, and surface cleaner. • Foaming Action • Non-Streaking • Safe on Glass & Plastics • Non-Flammable • Non-Ozone Depleting

More Info

Techspray Isopropyl Alcohol (IPA)

G4 70 % IPA, 30% DI water blend for effective and economical stencil cleaning, defluxing, and degreasing.

More Info

Techspray Isopropyl Alcohol Wipes

Convenient, low-linting wipes are pre-saturated with 99.8% pure IPA.

More Info

Techspray Label & Adhesive Remover

Citrus-based solvent safely and effectively removes labels and adhesive gums off equipment and products. Penetrates quickly and allows label to be peeled off without gummy residue.

More Info

Techspray No Clean Flux Remover

Non-flammable, high precision, and specifically formulated to avoid and clean white residues caused by no-clean fluxes.

More Info

Techspray Non-flammable Duster

100% non-flammable HFC-134a based duster.

More Info

Techspray Recycled Delicate Task Wipes

Ideal for light cleaning task in the laboratory or repair and maintenance facilities. Quickly wipes up liquid and dust. Packaged in a portable dispenser that reduces lint and cross contamination. Biodegradable and sustainable.

More Info

Techspray SMT Stencil Wipes

70% IPA, 30% DI water blend for effective and economical stencil cleaning.

More Info

Techspray Techclean Absorbwipe

Hydroentangled cellulose/polyester wipe with high absorbency and extra low particulate count and no chemical extractables. Class 100 cleanroom certified.

More Info

Techspray Techclean Anti-Static Wipe

Polyester wipe that is interwoven with DuPont's NEGA-STAT carbon yarn. NEGA-STAT dissipates static charge, preventing static build-up and allowing dissipation. Perfect for dry wiping ESD-sensitive components and boards. Tear resistant to allow cleaning around through-hole leads without fraying.

More Info

Techspray Techclean Brushes

Whether you are cleaning sensitive optics or scrubbing heavy soils, there is a brush to meet your needs. The bristle cut offers optimum cleaning with minimum effort. The quality natural materials and the TechBrush® manufacturing process ensures a durable long-lasting brush.

More Info

Techspray Techclean Purwipe

100% polyester wipe is a strong, low linting wipe that is ideal for SMT stencil cleaning and PCB rework. Tear resistant to allow cleaning around leads without fraying.

More Info

Techspray Techclean SMT Foam Wipe

Polyurethane foam wipe designed for cleaning surface mount stencils and screening equipment. Fiber-free foam does not generate lint, which can clog fine pitched stencils and cause misprints.

More Info

Techspray Techclean Twillwipe

100% cotton twill weave designed for wiping abrasive surfaces. Tear resistant to allow cleaning around leads without fraying. Low static generation, so good for static sensitive areas.

More Info

Techspray Techclean Wiper

Durable, high quality and low-linting wipes do not contaminate fine stencil apertures, preventing board misprints.

More Info

Techspray Technical Grade IPA

99.8% pure anhydrous (containing the least water possible) isopropyl alcohol is excellent for tape head cleaning, defluxing, stencil cleaning, and other light cleaning.

More Info

Techspray Techpump Bottles

Cap is pressed down to pump fluid into the dish. Air-tight check valve prevents evaporation, spillage, and fluid from dripping back inside and contaminating contents.

More Info

Techspray Zero Charge Anti-Stat

Fast drying, anti-static coating eliminates static charge and reduces triboelectric generation from flexible surfaces. Ideal for plastics, fabrics, and carpet.

More Info

Techspray Zero Charge Hand Lotion

Improves contact between personnel and grounding devices such as wrist straps and heel straps. Does not contain silicone or lanolin. Leaves skin soft without a greasy film.

More Info

Techspray Zero Charge Mat & Tabletop Cleaner

For general use in production areas, flux residues, oils, greases, and dirt. Eliminates charge while leaving an anti-static agent.

More Info

Techspray Zero Charge Screen and Keyboard Cleaner

Removes hand oils, ink marks, dust, and other contaminants from computer equipment. With regular use, cleaner will eliminate static charge from sensitive surfaces and provide long-term static protection.

More Info

Chemtronics Chamois Wipe

Coventry™ cleanroom laundered microfiber wipe with a laser edge to provide superior toughness and particle entrapment.

More Info

Chemtronics Chempad™ Presaturated Wipe

Heavy-duty, highly absorbent felt wipe, ideal for electronics and office equipment. Saturated with 91% IPA/9% deionized water.

More Info

Chemtronics CircuitWorks® Flux Remover Pen

Removes lead-free or tin/lead flux in seconds. Controlled and exact application. Dries fast. RoHS compliant.

More Info

Chemtronics CircuitWorks® No-Clean Tacky Flux

This conveniently packaged no-clean flux gel formulated for easy BGA rework has a long shelf life and requires no refrigerated storage. Syringe applicator provides exact delivery of flux to surface. Noncorrosive, halide and halogen free, long tack time. Meets IPC requirements for ROL0.

More Info

Chemtronics CircuitWorks® The Mighty Pen®

This powerful universal cleaning pen removes ink stains, adhesives and other difficult and stubborn soils with its outstanding cleaning ability and mild citrus aroma.

More Info

Chemtronics Controlwipes™ & Twillwipes™

Solvent-resistant and highly absorbent for abrasion-free cleaning and drying of sensitive surfaces, components and equipment.

More Info

Chemtronics Cottontips™

The economical swab designed for general cleaning applications.

More Info

Chemtronics Coventry™ Cleanroom Swabs

Coventry™ has a wide variety of swabs to meet your most demanding applications. All Coventry™ swabs are packaged in non-contaminating ESD safe plastic bags. You’re sure to find a swab from Coventry™ that meets your particular need.

More Info

Chemtronics Duster

Regular cleaning strength. Filtered to 0.2 microns, 100% ultra-pure HFC-134a. Safe on plastics.

More Info

Chemtronics Econowipes™

Coventry™ Econowipes™ are made from a hydro-entangled, 45/55 polyester/cellulose blend, for optimum purity in a non-woven wipe.

More Info

Chemtronics Electro-Wash® CZ

Removes handling soils from live circuits. Cleans oil and residue from sensitive surfaces. Safe on plastics, nonflammable. Dries fast, leaves no residue. Still the best CFC and HCFC replacement.

More Info

Chemtronics Electro-Wash® NR Cleaner Degreaser

Cleans oil from live equipment. Removes oil and oxides from relay and circuit banks. Cleans contamination from live connectors. Nonflammable, no residue, contains n-propyl bromide.

More Info

Chemtronics Electro-Wash® NX

Cleans oils and grease from live circuits, switches and relays. Nonflammable, extra cleaning strength; cleans encrusted hard-to-remove soils. Dries fast, leaves no residue. Test on plastics. Contains HCFC 225.

More Info

Chemtronics Electro-Wash® PX

Extra cleaning strength. Removes oils and hydraulic fluids from mechanical and electronic assemblies. Safe on plastics. Flammable.

More Info

Chemtronics Electro-Wash® Two Step

Removes solder pastes from stencils and screens. Removes cured conformal coatings and no-clean residues. Cleans reflow ovens. Nonflammable. Test on plastics.

More Info

Chemtronics Electro-Wash® VZ

For cleaning printed circuit boards and control systems. Evaporates quickly, leaves no residue. Penetrates to clean hard-to-reach areas. Test on plastics.

More Info

Chemtronics Flextips™

The ideal flexible head for cleaning optics and small confined areas.

More Info

Chemtronics Flux-Off® Aqueous Flux Remover

This aqueous flux remover is for use in ultrasonics and in-line cleaning systems.

More Info

Chemtronics Flux-Off® Lead-Free

The powerful flux remover for high temperature, lead-free flux removal. Engineered for removing high temperature, lead-free flux. Can also be used to remove tin/lead fluxes. Flammable, ozone safe. Evaporates quickly without leaving residue. RoHS compliant.

More Info

Chemtronics Flux-Off® No Clean Plus

Removes all types of rosin-based and synthetic no-clean fluxes. Flammable, dries fast, leaves no residue. Test on plastics.

More Info

Chemtronics Flux-Off® Rosin

Cleans type R, RMA, RA and rosin-based no-clean flux. Safe on plastics. Flammable. Dries fast, leaves no residue.

More Info

Chemtronics Flux-Off® VZ

The economical, non-ozone depleting, nonflammable flux remover.

More Info

Chemtronics Flux-Off® Water Soluble

Cleans water-soluble and rosin-based flux. Safe on water-sensitive components. Safe on plastics. Flammable. Dries fast, leaves no residue.

More Info

Chemtronics Foamtips™

Precision cleaning swabs with 100 ppi polyurethane foam head. Purest medical grade foam.

More Info

Chemtronics Freez-It® Freeze Spray

Locates and isolates thermal intermittent components. Pinpoint spray isolates individual components without freezing surrounding areas. Safe on plastics.

More Info

Chemtronics General Purpose Cleaners

Chemtronics' complete line of high purity solvents are among the finest, most effective products made for the critical cleaning and degreasing of electronics, electrical assemblies and sensitive components. Each cleaning agent has unique properties suited to specific applications from precision cleaning of solvent sensitive components to heavy duty degreasing of electrical equipment.

More Info

Chemtronics GMR Static Control Swabs

Protects components from static contamination. Engineered to eliminate damage from static electricity. Handles are solvent and acetone resistant, leaving no residue.

More Info

Chemtronics IPA Presaturated Wipes

General-purpose presaturated wipes in convenient dispenser.

More Info

Chemtronics Max-Kleen™ Citrus Heavy-Duty Degreaser

Citrus-based formula engineered for fast removal of oxidized grease, sludge, wax, tar and oil. Does not contain chlorinated solvents. Flashpoint greater than 100°F. Non-corrosive, nonconductive, and ozone safe; safe on most metals and plastics. Contains terpenes.

More Info

Chemtronics Max-Kleen™ Lectro-Solv™ Heavy-Duty Degreaser

This extra-strength, nonflammable, heavy-duty degreaser with dielectric strength of 30kV, is best for electrical applications. Non-corrosive, nonconductive, and has no flash point. Evaporates quickly without leaving residue. Contains trichloroethylene.

More Info

Chemtronics Max-Kleen™ Mighty Wash™

This powerful, industrial grade aqueous degreaser is the strongest water-based formula available. Its heavy-duty cleaning performance prevents flash rusting and corrosion. Biodegradable, nonflammable, and low foaming. Ozone safe, butyl-free, and low VOC's. CARB and OTC compliant.

More Info

Chemtronics Optic Prep™ Presaturated Wipe

Safely cleans and polishes optical surfaces, lenses, LCD, CRT screens. Compatible with most plastics, glass and metals.

More Info

Chemtronics Poly-Onyx™ ESD Wipe

Coventry™ cleanroom laundered ESD wipe that provides excellent cleaning and particle entrapment. The wipe's black color makes it an excellent inspection wipe.

More Info

Chemtronics Pow-R-Wash™ NX

Cleans silicone oils and grease from live switches and relays; removes carbon from live wire assemblies. Cleans encrusted soils. Nonflammable; dries fast, leaves no residue. Contains HCFC 225.

More Info

Chemtronics Pow-R-Wash™ PN Contact Cleaner

This nonflammable contact cleaner that is safe for use on powered-up contacts and surrounding plastic.

More Info

Chemtronics Pow-R-Wash™ PR

Removes oils and grease from wire harnesses; removes degraded contact lubricants. Safe on plastics, flammable. Dries fast, leaves no residue.

More Info

Chemtronics Pow-R-Wash™ VZ

Repair and maintenance contact cleaning. Ozone safe, nonflammable. Evaporates quickly, leaves no residue. Test on plastics.

More Info

Chemtronics Screen Prep™ Presaturated Wipe

Safely removes dust, dirt and oils. Leaves a static dissipative treatment; reduces dirt attraction.

More Info

Chemtronics Sealed Foam Swabs

Economical general purpose swabs. Best solvent retention. 100 ppi reticulated medical grade foam provides excellent particle entrapment. These swabs are free of adhesives or binders that could contaminate your process.

More Info

Chemtronics Sealed Polyester Swabs

An exceptionally clean swab; acid and solvent resistant. Sealed edges build in high strength with no loose fibers or particulates. Ideal for tough scrubbing around raised shapes.

More Info

Chemtronics Static Free™ Plast-N-Glas®

This non-streaking, static dissipative cleaner for all transparent surfaces effectively removes handling oils, finger soils, and nicotine stains. Foaming spray won't run or drip. Prevents attraction of dust and dirt. Not for use on anti-glare coating or mesh screens.

More Info

Chemtronics Ultrajet® Duster

Extra cleaning strength. Filtered to 0.2 microns, 100% ultra-pure HFC-134a. Safe on plastics.

More Info

Chemtronics Wrapped Foam Swabs

Durable wrapped foam swabs designed for precise applications. Good particle entrapment and work well as solvent applicators. Use in very tight tolerance areas, superior abrasion resistance. Wicking action pulls solvent from surfaces.

More Info

Chemtronics Wrapped Polyester Swabs

Cleanroom washed fabric formed into a unique solvent retaining swab. Engineered for unique applications requiring a combination of high solvent retention with the cleanliness of Class M1 processed polyester.

More Info

Kimberly-Clark KIMTECH PREP* SCOTTPURE* Critical Task Wipers

Designed for wiping tasks where precision and reliability are essential. Excellent absorbency and low-lint wiping.

More Info

Kimberly-Clark KIMTECH PURE* Wipers

For critical tasks in cleanroom environments. Double-bagged in anti-stat packaging.

More Info

Kimberly-Clark KIMTECH SCIENCE* KIMWIPES*

The first delicate task wipers for laboratories and the market leader for wiping surfaces, parts, instruments and lens cleaning.

More Info

Kimberly-Clark WYPALL* Jumbo Roll Dispenser

Efficient dispensing reduces waste. Metal with trash bag attachment.

More Info

Kimberly-Clark WYPALL* L20 Wipers

New patented technology creates ABSORBENCY POCKETS*, which help absorb more water faster. Textured side for cleaning power. Contains no binders or glues. Multi-ply capacity for large spills.

More Info

Kimberly-Clark WYPALL* L30 Wipers

Ideal for general-purpose, light-duty clean-ups and janitorial/maintenance wiping. Removes soils and liquids from faces and hands.

More Info

Kimberly-Clark WYPALL* L40 Wipers

Ideal for routine industrial cleaning and maintenance. Removes soils and liquids from face and hands.

More Info

Kimberly-Clark WYPALL* X50 Wipers

Reinforced for strength when wet or dry, this wiper combines versatile performance with economical design for light-duty tasks.

More Info

Kimberly-Clark WYPALL* X60 Wipers

Brings the absorbing power of HYDROKNIT* material technology to a lighter-weight wiper, combining versatile performance and economy for general-purpose tasks.

More Info

Kimberly-Clark WYPALL* X70 Wipers

Premium rag and shop towel replacement, made with HYDROKNIT* material. Heavy maintenance wiping; cleaning surfaces and tools.

More Info

Kimberly-Clark WYPALL* X80 Wipers

Wipers are made of HYDROKNIT* material and are the wipers of choice for the toughest jobs. Heavy-duty machine and part wiping. Prepping surfaces with solvents and cleaning rough surfaces.

More Info

Magnolia Acid Brush

More Info

Easy Braid Stencil Rolls

Easy Braid stencil rolls are designed for use in SMT screen printing lines.They keep stencil apertures clear of paste residues during the automatic screen printing process. They also clean the bottom of stencils, keeping them free from paste and flux between prints. This is critical in applications that include small component devices with fine lead pitch.

More Info

Gordon Brush Acid or Flux Brushes

Disposable brush for applying acid, glue, lubrication, or coatings.

More Info

Gordon Brush Aluminum Handle ESD Brushes

ESD-safe conductive aluminum handles with fibers hand-laced for better bristle retention and durability for detail cleaning, such as printed circuit boards and SMT assemblies.

More Info

Gordon Brush Camel Hair Round Brushes

Inexpensive detail brush that is terrific for painting, adhesive applications and general touch-up work.

More Info

Gordon Brush Chemical Resistant Ox Hair Flat Brushes

Made to withstand harsh chemicals. Ideal for applying conformal coatings. Unvarnished hardwood handle.

More Info

Gordon Brush Chemical Resistant Pure Red Sable Round Brushes

Ideal for applying conformal coatings. Chemical-resistant brush with unvarnished hardwood handle.

More Info

Gordon Brush Chip Brushes

Economical multi-purpose chip/paint brushes are perfect for one-time use. High-quality natural bristle and an un-laquered wood handle.

More Info

Gordon Brush ESD Double Sided Brushes

Two-sided ESD brushes, one side has a short flat end and the other side has an extra stiff chiseled end. Fibers are mechanically clamped into the handle for maximum retention.

More Info

Gordon Brush ESD Single Sided Brushes

One-sided ESD brushes with fibers that are mechanically clamped into the handle for maximum retention.

More Info

Gordon Brush Insulative Brush

Cleanroom approved. Designed for cleaning in tight areas including instrumentation and pinpoint cleaning. The fiber is mechanically clamped in a stainless steel tube which is inserted into a Delrin® handle.

More Info

Gordon Brush Plastic Handle Scratch Brushes

Stiff wire or twine in toothbrush-style brush with plastic handle.

More Info

Gordon Brush Pure Red Sable Round Brushes

Traditional round brush. Great for applications where detail is important.

More Info

Gordon Brush Upright Wood Handle ESD Brushes

ESD-safe heavy-duty scrubbing brush that works well for getting into tight areas. Great for detail cleaning, such as printed circuit boards and SMT assemblies.

More Info

Gordon Brush White Taklon Flat Brushes

Made with the finest white taklon, with lacquered handle.

More Info

Gordon Brush WhiteTaklon Round Brushes

Versatile, durable artist brush, with lacquered handle.

More Info

Gordon Brush Wood Handle ESD Brushes

ESD-safe toothbrush-style brush with wood handle.

More Info

LPS BFX All-Purpose Degreaser

All-purpose, water-based, industrial strength cleaner for dirt and oil. Butyl-free and biodegradable. Ideal for parts washers and pressure washers. It rinses clean and is safe to use on most surfaces except magnesium. Contains a pH of 11.5 -12.0.

More Info

LPS CFC Free Electro Contact Cleaner

Cleans and degreases delicate precision mechanisms with its fast-penetrating action to remove oil, grease, dirt, flux and other contaminants. CFC Free is safe on metal and plastic, is fast evaporating, does not leave a residue and does not contain HCFCs.

More Info

LPS CFC Free NU LVC Contact Cleaner

Fast evaporating, safe on plastics, and will not leave a residue. CFC Free NU has a reduced VOC content and conforms to VOC regulations for CARB, OTC and LADCO. Penetrating action removes dirt, flux, moisture, dust, and other contaminants from electrical equipment.

More Info

LPS EM Citro Emulsion Degreaser

Heavy-duty, citrus-based, emulsion degreaser that removes oil, grease, dirt, asphalt and tar. Has fast penetrating action. Safe on most metals and plastics and does not contain chlorinated solvents. The aerosol complies with current California Air Resources Board (CARB) and Ozone Transport Commission (OTC) regulations. EM Citro’s bulk sizes are solvent-based and can be diluted with water. When diluted in a 1:32 ratio with water, it complies with Southern California Air Quality Management District (SCAQMD) Rule 1171.

More Info

LPS EVR™ Clean Air Solvent

High strength solvent for removing grease, oil, and dirt from metal parts and equipment. Has a low VOC content and complies with SCAQMD Rule 102. In addition, EVR Clean Air Solvent complies with CARB and OTC rules on VOCs.Has no ozone depleting compounds and is not a hazardous air pollutant.

More Info

LPS G-49™ Orange Degreaser Low VOCs

Has a reduced VOC content and conforms to the VOC regulations of CARB, OTC, and LADCO. G-49™ is excellent for removing grease, grime, oil, and adhesives and is ideal for cleaning equipment. An excellent alternative to Methyl Ethyl Ketone (MEK), is not a hazardous air pollutant (HAP), and has no ozone depleting chemicals.

More Info

LPS KB 88 The Ultimate Penetrant

Formulated to attack and quickly release rusted and corroded nuts, bolts, hinges and other frozen components. With a high KB solvency value, low surface tension, and special additives, it enhances penetration, lubrication and corrosion attack. This unique penetrant outperforms the competition in independent lab tests. Penetrates faster and deeper than most similar products. KB 88 meets many local, state and federal VOC regulations, such as CARB, keeping you within VOC regulatory guidelines.

More Info

LPS LST Penetrant

Specially formulated with low surface tension for fast penetrating action. LST attacks rust and corrosion to free frozen parts and has a powerful foaming action that provides complete surface coverage while displacing moisture and contains no chlorinated solvents. It has a flash point of 175°F (79°C). For those hard-to-reach applications, it is designed with an Inverta Spray Valve allowing one to spray in an upright or inverted position.

More Info

LPS Micro-X NU Fast Evaporating Contact Cleaner

Reduced VOC content and conforms to the VOC regulations of CARB, OTC, and LADCO. Micro-X NU is fast evaporating, safe on plastics, and will not leave a residue. Ideal for removing dirt, flux, dust, and other contaminants from electrical equipment.

More Info

LPS NoFlash Electro Contact Cleaner

Alternative to HCFC 141b, NoFlash® is especially suited for cleaning electrical and electronic parts as well as other types of delicate mechanisms. It penetrates, cleans and degreases without leaving a residue. Fast-evaporating, non-flammable and safe to use on most surfaces, but may be harmful to some plastics. Does not contain HCFC 141b.

More Info

LPS Precision Clean Multi-Purpose Cleaner/Degreaser

Water-based cleaner, a universal, biodegradable, industrial cleaner/degreaser which removes tough stains and soils with an easy-to-rinse application. The pH for concentrate = 13, the pH for ready-to-use = 12.5. Is safe to use on most surfaces except magnesium. It does not contain butyl, chlorinated or petroleum solvents, bleach, ammonia or abrasives.

More Info

LPS PreSolve® Orange Degreaser

High Performance Degreaser ideal for removing grease, adhesives, tars and oils. This orange-based degreaser is designed to solve the toughest cleaning problems in seconds. It evaporates leaving low residue and is safe to use on all metal parts and equipment. PreSolve® has a flash point of 104°F (40°C) and does not contain any chlorinated solvents.

More Info

LPS REVO 66 Contact Cleaner

A non-flammable alternative to HCFC-based contact cleaners. Revolutionary technology is ideal for removing dirt, moisture, flux or oxides from the internal components of electronic equipment. Fast evaporating and will not leave a residue.

More Info

LPS T-91 Non-Solvent Degreaser

Environmentally safe, green degreaser which outperforms most solvents. Contains no solvents and has premium performance cleaning ability to remove grease and oil. Zero VOCs and conforms to the VOC regulations of CARB, OTC, LADCO, and SCAQMD. Qualifies to the United States EPA “Design for the Environment” requirements. Proprietary formula that is biodegradable and has a neutral ph of 7.3 to 7.7. T-91 is non-flammable, non-toxic, and is ideal for traditional solvent cleaning, basin style part washers, and dip tanks.

More Info

LPS VOC Free Contact Cleaner

Superior wetting action, fast-evaporating, non-flammable cleaner that penetrates, cleans and degreases electrical equipment and fine precision parts without leaving a residue. It does not contain VOCs and is an excellent alternative to HCFC 141b cleaners. Safe to use on most surfaces, but may be harmful to some plastics.

More Info

LPS ZeroTri® Heavy-Duty Degreaser

Excellent grease remover, fast-acting, heavy-duty solvent that cleans and flushes in a single operation. Suited for heavy-duty degreasing applications where fast drying is essential. With quick penetration, ZeroTri™ works its way into hard-to-reach areas and instantly removes oil, grease, dirt and other contaminants leaving no residue. It does not contain any chlorinated solvents and is safe to use on most surfaces.

More Info