ESD Safety Products – ESD Protection Products

3M™ EM Eye Meter —ESD Event, Electromagnetic Field and RF Signal Measurements

Fitting literally in the palm of your hand, this meter measures EM fields, RF signals and ESD events. At just 9.75 oz, it fits in your pocket. The touch screen and color display make it very easy to use.

More Info

3M™ Test Kit for Static Control Surfaces

The 3M Test Kit 701 contains a lightweight, user-friendly megohmmeter plus all of the components needed to make testing mats and other surfaces simple and accurate. All of the items are packaged in a foam-lined carrying case.

More Info

3M™ WS Aware Workstation Monitors

3M™ WS Aware workstation monitor provides continuous monitoring of voltage and resistance for 2 wrist straps along with 2 mats and 2 metal grounds; or 4 metal grounds. It is recommended for use in highly critical areas.

More Info

3M Accessory Pack with Charge Plate and Charger

Used for periodic verification of air ionizer performance, when used in conjunction with the 718 Static Sensor.

More Info

3M Antistatic Utility Tape

Antistatic adhesive with a clear, 1 ml polyester film backing and ESD symbols for use in static-sensitive areas. 40PR, 2.2 ml.

More Info

3M Benchtop Air Ionizer

The 3M™ Benchtop Air Ionizer 963E delivers a stream of ionized air over a 2' x 4' workbench area. It is used to neutralize static charge on non-conductors that may be in close proximity to static sensitive devices.

More Info

3M Dri-Shield 2000 Moisture Barrier Bag

The Dri-Shield 2000 bag replaces costly nylon/foil laminates with metallized polyester and offers the strongest price/performance relationship in the dry packaging of moisture sensitive devices. The Dri-Shield 2000 bag also provides full protection from ESD, static fields and tribocharging.

More Info

3M Dual Wire Workstation Monitor

Continuously monitors the resistance of the operator and worksurface ground connections.

More Info

3M ESD Pro Event Indicator

The 3M™ ESD Pro Event Indicator that counts the number of ESD events, and indicates the relative strength of each discharge.

More Info

3M ESD Signs

More Info

3M Floor Mat, Dissipative 3-Layer

More Info

3M Floor Mat, Dissipative Rubber

More Info

3M Floor Roll, Dissipative 3-Layer

More Info

3M Floor Roll, Dissipative 3-Layer, No Hardware

More Info

3M Floor Roll, Dissipative Rubber

More Info

3M Ground Man™ Plus Ground Monitor

Allows users to continually monitor up to three connection points on tools. The monitors indicate whether each individual ground connection being monitored is within specification or has failed.

More Info

3M Ground Master™ Equipment Ground Monitors

The 3M™ Groundmaster™ is designed to provide continuous monitoring of proper ground connections of up to 8 tools and up to 16 tools in tandem with another GroundMaster.

More Info

3M Ground Pro® Handheld Ground Integrity Meter

Essential tool for anyone concerned with obtaining proper grounding of equipment during installation, maintenance, and throughout regular use. The Ground Pro measures ground impedance in accordance with ANSI 6.1 and ANSI/ESDA 20.20 standards.

More Info

3M Grounding Cords

More Info

3M Heel Grounder

More Info

3M Ionized Air Gun

The 3M™ 980 Ionized Air Gun neutralizes static charge on non-conductors while at the same time blowing particulate contamination off of any surface.

More Info

3M Iron Man™ Workstation Monitors

Iron Man Workstation Monitor CTC330 monitors the printed circuit board being worked on for EOS (electrical overstress) such as from soldering iron overvoltage. The Iron Man Plus CTC331 monitors the PCB for EOS along with monitoring one dual wire wrist strap and mat.

More Info

3M Overhead Air Ionizer

The 3M™ 991 Overhead Air Ionizer delivers a stream of ionized air from above over a workbench area to neutralize static charge on non-conductors. The overhead air ionizer saves valuable workbench space.

More Info

3M Premium Field Service Kit

Portable field service kit includes dissipative foldable worksurface, wrist strap monitor 725, 3051 ground cord, 3038 alligator clip, and 2204 adjustable wrist band.

More Info

3M SCC1000 Static Shielding Bag - Open Top

The SCC 1000 is recognized as the most consistently reliable, readily available, and most competitively priced static-shield bag in the electronics industry. This transparent, metal-in, static-shielding bag provides a static safe environment for sensitive electronic devices. It is the bag of choice for IC and PCB protection. SCC 1000 bags are tested to meet or exceed the requirements of EOS/ESD Standards. 100/pack.

More Info

3M SCC1000 Static Shielding Bag - Zip Top

The SCC 1000 is recognized as the most consistently reliable, readily available, and most competitively priced static-shield bag in the electronics industry. This transparent, metal-in, static-shielding bag provides a static safe environment for sensitive electronic devices. It is the bag of choice for IC and PCB protection. SCC 1000 bags are tested to meet or exceed the requirements of EOS/ESD Standards. 100/pack.

More Info

3M Single Wire Wrist Strap Monitor

More Info

3M Snap for Mat

More Info

3M Standard Field Service Kit

Compact portable field service kit that fits easily into most tool cases. Two pockets for cord storage. Includes 725 monitor, 2368 adjustable fabric wrist band, and 2370 dual conductor coiled cord; 10 ft.

More Info

3M Static Sensor

Easy-to-use, hand-held instrument designed to measure static voltages on objects and surfaces, arising from electrostatic charge buildups.

More Info

3M Table Mat, Dissipative 3-Layer

More Info

3M Table Mat, Dissipative Rubber

More Info

3M Table Roll, Dissipative 3-Layer

More Info

3M Table Roll, Dissipative Rubber

More Info

3M Table Roll, Dissipative Rubber, No Hardware

More Info

3M Worksurface Cleaning Products

Extra strength fluid to remove dirt, spot, and stains from static control surfaces.

More Info

3M Wrist Band

More Info

3M Wrist Strap and Footwear Tester

AC-powered unit designed to be wall-mounted in a production facility for daily testing of employees' static control wrist straps.

More Info

3M Wrist Strap and Ground Monitor

Used in work areas or other locations to monitor the ground impedance of metal ground connection in process tools in semiconductor, disk drive, flat panel, electronic equipment manufacturing and other environments.

More Info

3M Wrist Strap Grounding

More Info

3M Wrist Strap Tester

Used to test wrist straps in a variety of situations, from daily testing in a production facility to periodic testing at remote sites or field service locations. AC adapter and a wall mounting kit included.

More Info

Techspray Flux/Liquid Dispensers

Wet sponges and dispenses liquids at the workbench without waste.

More Info

Techspray Needle Flux Dispensers

Leak-proof dispensers offer a convenient way to dispense precise amounts of liquids without waste.

More Info

ASG/Jergens Compact Tape Dispenser

Features memory function to program six different lengths.

More Info

Botron 2-Layer Rubber Mat Roll

.060 thick, 2-layer rubber table mat & rolls. Static dissipative heat resistant, conductive on bottom dissipative on top <10/8. All cut mats come with 10' common point ground.

More Info

Botron Adjustable Metal Wrist Strap

Cleanroom-safe stainless steel band. One size fits all, adjustable diameter of 2.63" to 1.9". The 1/8" snap securely attaches to available 6' or 12' coiled cords.

More Info

Botron Antistatic Tape

More Info

Botron Burgundy Constant Contact Hinge Wrist Strap

Adjustable wrist strap incorporates a Constant Contact Hinge (CCH). Attaches to a wide variety of coil cords via 4mm stud. Alone or in sets with 6′ or 12′ standard coil cords.

More Info

Botron Common Point Ground

10′ long straight cable with molded in 1 meg resistor. The 3/8″ snap ensures secure connection to table mats. Includes two banana jack receptacles for wrist straps. #10 ring terminal for connection to ground.

More Info

Botron Conductive Bands and Straps

Made of natural rubber and impregnated for long term use. Protects static sensitive components, used to attach paperwork, close bags, wrap around IC tubes or trays.

More Info

Botron Conductive Grid Tape

More Info

Botron Dual Bench Ground

Molded enclosed box contains no metal edges and mounts under front edge of workstation. Includes a 10′ long ground cable with #10 ring terminal connector. Two banana jack receptacles for secure ground connections. Two parking studs (4mm) for storing cords when not in use.

More Info

Botron ELITE ESD Wrist Strap & Footwear Tester

Available as both a On-Demand tester and Data Acquisition tester, the ELITE is the most advanced ESD test equipment on the market. Built in failure prevention mode prevents latent failures from occurring on the line. Standard with VTR Technology and a 30 volt test provides more accurate test results. OEM and optional equipment include Ethernet, Laser Barcode Scanner, HID Wiegand Interface, 2 PLC relays, and RS485. Can be purchased with ELITE software, footplate and or test stand.

More Info

Botron Ergo One Toe Grounder

Comfortable stretch material for easy adjustment, 1.5″ wide reversible cup design, two-layer rubber material with non-marking inner cup, 10″ long conductive tab, built-in 1 meg ohm resistor.

More Info

Botron ESD Floor Tape

More Info

Botron Floor Mat Ground

10′ long straight cable with molded low profile mushroom cap. The 3/8″ snap ensures secure connection to floor mats. #10 ring terminal for connection to ground.

More Info

Botron Mill Standard Labels

Bright yellow self adhesive labels with bold black print.

More Info

Botron Non-Marking Heel Grounder

Comfortable stretch material for easy adjustment, 1.5″ wide cup design, two-layer rubber material with non-marking inner/outer cup, 18″ long conductive tab.

More Info

Botron Sheet Protectors

More Info

Botron Standard Adjustable Wrist Strap

Adjustable blue elastic material includes a large conductive area and stainless steel backplate. 1/8″ or 1/4″ models available alone or with either 6′ or 12′ coil cords

More Info

Botron Tape Dispensers

Holds tape up to 2” wide or 2 rolls 1” wide with a 3” core. Using these tape dispensers reduces static charge generation.

More Info

Botron Universal Snap Kit

Fast and easy way to install 10mm snaps or studs to soft work station materials. Includes two screws (floor and table mat lengths). One each: 10mm socket, 10mm stud, washer and screw base.

More Info

Desco Attention Label

3in core. RS-471 symbol is same as ESD Association ESD Susceptibility symbol per ESD S8.1.

More Info

Desco Dual Station Monitor

Continuously monitors the integrity of two operators and two ESD workstations, eliminating the need for periodic testing and recording. Ideal for adjacent workstations for assembly, test, packaging, or other applications. Each satellite includes a monitored wrist strap ground, parking snap, and unmonitored ground for guest, cart, equipment or other grounding applications. Audible and LED visual alarms activate instantly when a failure occurs.

More Info

Desco ESD Attention Label

Used to identify assemblies and devices that have a sensitivity to ESD events; to close shielding bags and seal ESD protective packaging. Integrated dispenser simplifies the process of removing a label from its liner.

More Info

Desco Foot Grounders

More Info

Desco Ground Cords

Barrel type banana plug. Fits industry standard banana jack.166 in. (4.22mm). Metallized, high flex tinsel, black jacket. One megohm, 1/4 watt, series resistor, molded within snap assembly, limits current for operator safety. Spring loaded 4mm snap socket.

More Info

Desco High Ouput Benchtop Ionizer

Benchtop steady-state DC ionizer. Specially designed fan modules create better coverage (16in x 36in), consistent offset voltage (balance) ±3%, and superior discharge times(<1 second at 12in) tested per ANSI/ESD STM 3.1. Sealed plenum air flow prevents contamination from being introduced to workstation. Active balancing system continually adjusts voltage output for optimal performance and automatically alarms when maintenance is needed or unit is not operating correctly.

More Info

Desco Jr Ionizer With Cassette

Compact auto-balanced 60-77 CFM adjustable output air flow. Efficient design minimizes bench top space, while maximizing neutralization efficiency and overall performance (< 2 sec discharge time at 12in and ±15V offset). Patented Emitter Replacement Cassettes and Removable Back Grill allows cleaning to be done away from workstation and emitter pins to be replaced in the field with minimal downtime

More Info

Desco Single Station Continuous Monitor

Single-station continuous monitor for operator, ESD worksurface, and electrical ground. Continuously monitors the integrity of operator’s electrical ground as well as one operator and ESD workstation, eliminating the need for periodic testing and recording. Park snap feature means operator can disconnect wrist strap cord when normally leaving the workstation without audible (false) alarm sounding. Flexibility for work areas where an ESD work surface is not used such as the operator of an SMT machine or oven. Full-time dual-status LEDs. Alarms activate instantly when a failure occurs, allowing immediate corrective action. Signal safe to use with sensitive components. Easy-to-install housing.

More Info

Desco Statfree 3 Layer Mat

More Info

Desco Statfree B™ Vinyl Roll

Extruded homogenous vinyl provides reliable path to ground and eliminates static charge generation as a worksurface table mat, shelf liner, and cart liner. Dissipative Worksurface - 10E6 - 10E8 Ohms RTT slows charge removal; meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 .100”. Minimal shrinkage and curling.

More Info

Desco Statfree i™ Ergonomic Anti-Fatigue Mat

Premium nitrile butadiene homogenous rubber with no clay or silica fillers. Attractive beveled edge end finish allows you to use it as a stand-alone mat. Tested for cleanrooms; minimal particulation suitable for use in critical environments. Suitable as floor in ANSI/ESD STM 97.1 floor-footwear system. Grounding hardware NOT included, individual mats should be grounded.

More Info

Desco Statfree S Plus™ Anti-Fatigue Roll

Combines a cross-link vinyl/nitrile rubber construction for three times the resilience of ordinary vinyl foam matting. Safe surface for workers; mat stays clean. Meets ANSI/ESD S20.20 flooring requirement. Minimal shrinkage and curling, lays flat. Grounding hardware not included.

More Info

Desco Statfree T2™ Dual Layer Rubber Roll

Durable rubber material, dissipative on one side and conductive on the other. Bottom conductive layer provides reliable path to ground, compatible for use with continuous monitors. Easier to clean than vinyl mats; excellent coefficient friction for handling electronic products. Minimal shrinkage and curling, lays flat. Grounding hardware not included.

More Info

Desco Statfree® High Density Foam, X-Linked

Antistatic, low tribocharging. Minimizes charge generation; material will conduct charges if grounded. Dissipative - corrosion resistant. Ideal for long term storage. Uniform protection - will not affect the solderability of device leads. Cross linked will not particulate- choice for critical environments. Lead-free RoHS compliant.

More Info

Desco Statguard® Conductive Acrylic Latex Paint

Can replace ESD floor mats in electronics, manufacturing, assembly, and test areas protecting ESD susceptible items. Adheres to floors, walls, or wood furniture. Provides ESD protective surface on concrete and epoxy floors and in places which are difficult to protect. Apply via rolling or spraying.

More Info

Desco Statguard® Dissipative Floor Finish

ESD footwear removes the charge off your body. Can be applied on many hard surfaces or sealed floors including vinyl, VCT, linoleum, rubber, epoxy, acrylic paint, and concrete. Converts a non-ESD floor to an ESD floor. Produces high-gloss, durable finish and greater durability in all humidity environments.

More Info

Desco Statshield® Smock

Groundable static control garment system tested per ANSI/ESD S20.20-2007 (RTG < 3.5 X 10E7). Creates Faraday Cage effect around torso and arms of operator. Conductive knitted cuff allows operator to connect coil cord to smock, keeping the coil cord out of the workstation. Has badge holder tab and two pen pockets in sleeve.

More Info

Desco Statshield® V-Neck Overshirt

Creates Faraday Cage effect and shields charges on operator’s clothing. Provides continuous and consistent shielding throughout garment. Meets Static Control Garment required limit of ANSI/ESD S20.20 < 1 x10E11 ohms tested per ANSI/ESD STM 2.1.

More Info

Desco Surface Resistance Checker

Used to determine if a surface is dissipative, conductive or insulative. Color-coded LEDs quickly provide exponent range for checks of EPA ESD control items. Operates on 9 volt battery; light warns when battery is low. With optional leads can be used to indicate resistance point-to-point and resistance-to-ground of flooring and mats.

More Info

Desco Surface Resistance Kit

Analog Compliance Verification Surface Resistance Checker. Used for determining if a surface is dissipative, conductive or insulative. Portable operation with 9V battery. LED Illuminates when battery power is low, prevents bad measurements. Kit includes electrodes and leads.

More Info

Desco Tape

Tough, durable floor tape, excellent for aisle marking and area designation. Bright yellow. Quick-stick adhesive, easy to adhere to floor.

More Info

Desco Topical Antistat and Cleaners

More Info

Desco Topical Reztore™ Antistatic Coating

Long-lasting, hard-coat formula that provides a safe path to ground. Keeps triboelectric charges well below 200 volts per EIA 625. Static dissipative.

More Info

Desco Two-Fan Overhead Ionizer

Two three-blade fans with steady state DC ionization for 2 ft x 4 ft coverage area. Unit will automatically shut down and alarm if/when supply voltage drops.

More Info

Desco Wescorp Antistatic Tape

Low-charging transparent cellulose film with high-tack rubber adhesive generates less than 50 volts when unwound from roll, making it safe to use around most ESD-sensitive items. Plastic core minimizes contamination in clean or sensitive areas.

More Info

Desco Wrist straps

More Info

Desco Wrist Straps - Metal Expansion

Premium metal expansion wrist bands provide a more reliable path-to-ground. Size adjustment allows operator to adjust to their comfort level. Medical grade stainless steel backplate and links eliminates allergic skin reaction for most operators. Durable material will not wear and provides consistent 1-5 pound release to prevent accidental disconnects and increased safety. Date code provided for tracking and quality control. Over 62 times the minimum requirement per ESD S1.1

More Info

Desco Wrist Straps, Elastic - Extra Wide

Extra wide, soft elastic band provides increased wearer comfort. Has silver impregnated polypropylene knitted on inside for superior conductivity. Reliably removes generated static charges. Replacement elastic bands available and easy to replace without tools. Medical grade 300 series stainless steel used for all metal parts. One megohm series resistor. Date coded providing lot traceability to ensure quality control.

More Info

Elkay Plastics Polyethylene, Pink Anti-Stat Flat Bags; 2 ml

Provide static control when Faraday Cage Protection is NOT required. The amine free interior is compatible with polycarbonate surfaces. These pink tinted bags are transparent, making component identification easy. Heat sealable.

More Info

Elkay Plastics Polyethylene, Pink Anti-Stat Flat Bags; 4 ml

Provide static control when Faraday Cage Protection is NOT required. The amine free interior is compatible with polycarbonate surfaces. These pink tinted bags are transparent, making component identification easy. Heat sealable.

More Info

Elkay Plastics Polyethylene, Pink Anti-Stat Seal Tops Bags; 4 ml

Provide static control when Faraday Cage Protection is NOT required. The amine free interior is compatible with polycarbonate surfaces. These pink tinted bags are transparent, making component identification easy.

More Info

Menda Badge Holders

Menda now offers complete ID systems.

More Info

Menda Workstation Organizers

Ideal for improving the appearance of any ESD workstation and standardizing the placement of tools.

More Info

Purus Tacky Mat

Purus mats are the newest, most advanced cleanroom mat to be introduced to the market. The superior quality of these cleanroom mats is the result of over 15 years of experience and expertise in the development and manufacturing of cleanroom mats combined with the latest technology and equipment in the industry. The multi-layered mat removes dirt and dust from foot traffic and equipment wheels prior to their entry into a clean or controlled environment. Each numbered layer is fully coated with a particle grabbing adhesive. Once the top layer is saturated, a quick and easy removal of that layer exposes the next layer and returns the mat to maximum efficiency. Also available in grey and in sizes 24 x 30 and 36 x 36.

More Info

R&R Lotion Cleanroom-safe Static Dissipative Bottles

Static free, non-greasy, ESD-safe.

More Info

R&R Lotion ESD-safe Flux Bottles

Static free, non-greasy, ESD-safe.

More Info

R&R Lotion ESD-safe Spray Bottles

The only static dissipative spray bottles in the world.

More Info

R&R Lotion ESD-safe Square Bottles

With wide mouth, ideal for liquid chemical or dry storage.

More Info

R&R Lotion IC Antibacterial Hand Cleaner

Antibacterial hand cleaner for use in electronic, cleanroom environments. Will not cause contamination.

More Info

R&R Lotion IC Antibacterial Hand Lotion

Antistatic Antibacterial Germ Killing hand lotion is enriched Aloe Vera, Blue Agave and Jojoba as well as Vitamins AD & E. Loaded with a botanical blend of Blueberry, Cranberry, Pomegranate, Strawberry, Raspberry, Grape Seed, Green Tea, Green Coffee Bean, and Acai Berry. This Antibacterial, "Alcohol Free" moisturizer will Kill germs for up to four hours. Relieves chapping, skin irritation and skin sensitivity caused by regular use of latex or nitrile gloves as well as helping to prevent Urticaria, which is a skin irritation caused by perspiration and lack of ventilation inside the glove. Formulated for the Pharmaceutical, Clean Room, Medical, Food Service and Industrial Environments.

More Info

R&R Lotion IC Hand Lotion

Antistatic Blue hand lotion is enriched with Aloe Vera & Vitamins AD & E. This lotion is bottled in our ESD Static Dissipative container with an average surface resistivity of 10^9 to 10^10 Ohm/sq. and will dissipate a static charge of +/- 5000V in less than two seconds. Our lotion does not contain any Lanolin, Mineral Oils, Glycerin, or Silicone and will not contaminate print circuit boards. The lotion relieves chapping, skin flaking, irritation and skin sensitivity caused by regular use of Latex and Nitrile gloves. Use before putting an ESD wrist strap on to enhance the workers capacitance on the wrist. Formulated for the Electronics and Pharmaceutical Industries. Fragranced with a crisp accord of Bergamot, Grapefruit, Lemon Splashes, and Essence of Herbal Tea. Our Static Dissipative Bottle Helps to meet ESD-TR20.20-2000.

More Info

R&R Lotion IC Topical Antistat Spray

Eliminates static charge buildup on plastics, boxes, carpets.

More Info

R&R Lotion IC Workstation and Mat Cleaner

Low-ionic, general purpose cleaner. Biodegradable, alcohol-free and odorless. For electronic and cleanroom environments.

More Info

ESD (Static Control) Products