- 3M (33)
- 3M Scotch-Brite (2)
- 3M Scotch-Weld (7)
- Asymtek (3)
- CircuitWorks (1)
- Devcon (1)
- Dynatron (1)
- Edsyn (1)
- Henkel (2)
- Jensen (5)
- Jensen Global (31)
- Loctite (55)
- Lord (1)
- Menda (2)
- Metcal (3)
- Metron (4)
- Nordon EFD (1)
- Nordson (13)
- Nordson EFD (7)
- Nordson EFD Optimum (3)
- Nordson TAH (1)
- OKI (2)
- Optimum (2)
- Pace (1)
- PACE Worldwide (1)
- Scotch (3)
- Scotch® (1)
- Scotch-Brite (23)
- Scotch-Weld (18)
- Smoothflow (1)
- Steinel (4)
- TAH (1)
- Techcon (5)
- Techcon® (2)
- Ultimus (1)
- ValuTek (1)
- Weller (6)
- ABS Plastic Welding Rod (1)
- Actuator Assembly (1)
- Adapter (2)
- Adapter Assembly (1)
- Adjustment Plate (1)
- Applicator Repair Kit (1)
- Brush Tip (3)
- Cartridge (3)
- Cartridge System (2)
- Cartridge Wiper (1)
- Conversion Kit (2)
- Dispensing Retainer (1)
- Dispensing Tip (2)
- Dispensing Tool (1)
- Drive Assembly (1)
- End and Tip Cap (1)
- End Cap (5)
- End/Outlet Cap (1)
- Feed Line Tubing (3)
- Finger Switch (3)
- Fluid Element Assembly (2)
- Foot Switch (2)
- Hand Plunger (4)
- HDPE Plastic Welding Rod (1)
- Heater Assembly (1)
- Hose (2)
- Junction Box (1)
- Light Blocking Shield (1)
- Lint Roller (3)
- Male Connector (1)
- Manual Plunger (2)
- Mounting Bracket (1)
- Mounting Rail (2)
- Needle Calibration Kit (1)
- Needle Cover (2)
- Nest Assembly (1)
- Operation Box (1)
- O-Ring Seal (1)
- Oval Tip (1)
- Pistol Grip Handle (1)
- Piston (4)
- Piston Kit (1)
- Plastic Head Assembly (1)
- Plunger (6)
- Plunger Assembly (1)
- Power Supply (1)
- PP Plastic Welding Rod (1)
- Pump Head (1)
- Receiver Head Assembly (4)
- Replacement Filter (1)
- Replacement Plunger (2)
- Ridge PVC Welding Rod (1)
- Rubber Stopper (1)
- Screw Mount Blade (1)
- Seal (1)
- Slip-Luer Cap (2)
- Syringe Adapter (15)
- Syringe Adapter Assembly (2)
- Syringe Air Stopper (3)
- Syringe Airline Adapter (1)
- Syringe Finger Switch Assembly (1)
- Syringe Holder (2)
- Syringe Plunger (1)
- Syringe Stand (1)
- Thermostat (2)
- Tip Cap (3)
- 0.033 in x 0.5 in (1)
- 0.07in (1)
- 0.09in (1)
- 0.12in (1)
- 0.63in (1)
- 1.6 mm OD x 1.0 mm ID x 65.6 ft L (1)
- 1/4 in MNPT x Female Luer (1)
- 1/4 in NPT x Female Luer (1)
- 1/4 in OD x 33 ft L (1)
- 1/4 NPT (1)
- 1/4in (1)
- 10 cc (4)
- 10 mL (1)
- 10cc (12)
- 10in H (1)
- 10in L (1)
- 10ML (2)
- 1-5/8 in (Dia.) (1)
- 180 ml (1)
- 18ga (2)
- 1cc (1)
- 2 mm O.D x 1.4 mm I.D x 65.6 ft (1)
- 2 x 9 x 2in (1)
- 2.0 mm OD x 1.4 mm ID x 65.6 ft L (1)
- 2.1 mm I.D. (1)
- 2.5fl oz (1)
- 20.8 mm Width (1)
- 20fl oz (1)
- 3 cc (1)
- 3 cc Syringe (1)
- 30 cc (3)
- 30 cc/50 cc (1)
- 30 mL (1)
- 30/50cc (8)
- 30/55cc (3)
- 30; 55cc (3)
- 300 mL Cartridge (1)
- 300ML (1)
- 30cc (3)
- 3-3/4 in L (1)
- 360mm (1)
- 3cc (9)
- 3ML (1)
- 4 in x 29 ft (1)
- 406ml (1)
- 45ml (1)
- 5 cc (1)
- 5 in x 5 in (1)
- 5 micron (1)
- 5/32in (1)
- 50 mL (2)
- 50ml (2)
- 5cc (5)
- 6fl oz (1)
- 8-3/4 in L (1)
- 9 g (0.32 oz.) (1)
- 9 in x 1.5 in x 0.4 in (4)
- Universal (1)
- 0.5in (2)
- 0.74in (1)
- 1.5in (2)
- 10in (2)
- 12.5in (1)
- 1in (2)
- 2.88in (1)
- 20.8mm (1)
- 25ft (1)
- 26.75in (1)
- 29ft (1)
- 2in (2)
- 3.09in (2)
- 3.75 in (1)
- 3.75in (1)
- 33ft (1)
- 36.25 in (6)
- 3ft (2)
- 5.96in (1)
- 6.3125 in (1)
- 6.75in (1)
- 65.6ft (3)
- 6ft (5)
- 7.3in (2)
- 7in (1)
- 8.75 in (1)
- 8in (1)
- 9.375 in (1)
- 9in (5)
- Hose:6ft (1)
- 0.9 m Hose (1)
- 0-100 PSI regulator and Gauge (1)
- 160 psi Pressure (1)
- 4:1 Plunger (1)
- Accept Dispense Needle Tips That Slide Over The End Of The Cap (2)
- Adapter Cable, 9-pin female D-shell to 3.5 MM Plug (1)
- Allow to Quickly Position Needle Tip Location After Change-Over (1)
- Allows for Multiple Dispense Points and Curing to Increase Throughput (1)
- Allows Multiple Systems Integration Simultaneously, Accepts Up to 8 Inputs and 8 Outputs (1)
- Chamfered, ESD-Safe (1)
- Compact, Space-Saving Footprint, Rugged, Lightweight Units Are Easily Transported for Different Jobs (1)
- Converts the Standard 1:1/ 2:1 Applicator to A 4:1 Ratio Dispense Applicator (1)
- Converts the Standard 1:1/2:1 Applicator to A 4:1 Ratio Dispense Applicator (1)
- Design to Seal Inlet Side of Syringe Barrel to Ensure No Contaminants Come In Contact with Material During Storage and Shipment (2)
- Designed with Large Flat Bottom, The Stand-Up Tip Cap Enables The Syringe Barrel to Stand Upright (1)
- Double Helix Brush Tips for Spread Applications Such As Glues and Other Materials (2)
- Double-Acting Cylinder Allows Adjustable Opening and Closing Speeds for Accurate Process Control, Operational with Pressure-Time Applications, Dispenses Fluids up to 15,000 cps (2)
- Easy Cleaning without Valve Demounting, Field Serviceable, Easy Integration with Loctite Reservoirs and Controllers (1)
- Easy Programming Controller, with Storage Capacity for 25 User Defined Programs, Reduces Adhesive Set-Up Waste, Smallest Footprint on The Market to Conserve Bench Top Space, Automatic Syringe Engagement to Ensure Easy and Error-Free Syringe Changeove (1)
- Eliminates Placing Dispense Valve Or Syringe on Work Surfaces and Protects Dispense Needles From Contamination (1)
- End Caps Snap Securely Over Cartridge Flanges to Prevent Leaks and Fluid Contamination. The Center Push-Button Presses The Cap Against The Cartridge Wall to Form A Positive, Airtight Seal (1)
- Flexible Hose Minimizes Interference and Tangling, Portable Length Hose is Easy-to-Use While Hand-Carrying Adhesive Tank, Lightweight Nylon Tube with Synthetic Rubber Coating Improves Control and Reduces Fatigue, Fits Easily and Securely Fastens to a (1)
- Free of Flash, Burrs and Contaminants, Engineered Hub Flats for Easy Twist On, Twist Off (2)
- High Quality, Sturdy One-Piece Design, Solid Multi-Seal Piston Or Multi-Seal Piston with Prestaged Center Bleed Plug (1)
- High Resolution Stroke Adjustment, Fail sage-air to open, spring closed, Easy cleaning without valve demounting (1)
- It Can Be Attached to Any Size Syringe Or Valve, As an Alternative to the Electronic Foot Pedal (1)
- Light Weight (1)
- Lightweight Design (2)
- Lint Roller Made with Scotch Adhesive (2)
- Low Voltage, Push Button Finger Switch Controls Dispense Cycle (2)
- Optimum Cartridges and Retainers Have Been Designed to Function As A Complete, Integrated System That Improves Yields and Reduces Costs In Fluid Packaging and Dispensing Processes (3)
- Plate Allows for Up to 5 Inches of Rough Adjustment of the Location of the Mounting Rail Above Or Below the Mounting Hole In the Robot (1)
- Prevent any Bending, Breaking or Outside Contamination (2)
- Prevent Dripping, Eliminate Waste by Wiping Barrel Walls Clean as Fluid is Dispensed (4)
- Prevent UV Or Visible Light From Curing the Adhesive, the Tip of the Dispense Needle Will Pass Thru the End of Blocking Shield While the Majority of the Needle is Protected From Light Sources (1)
- Prevents an air bubble from getting into the feedline and passing along to the valve, Eliminates the need for purging the system of an air bubble at bottle changes (1)
- Provides Full-Barrel Swivel, Horizontal and Vertical Adjustment, Accepts All Efd Barrels (1)
- Quick Push-to-Connect Inlet for 1/4 inch or 5/32 inch Adapter Hose (2)
- Receiver Head Assembly with Connecting link between time/pressure Controllers and Syringe Assemblies (4)
- Replacement Black Fluid Element Assembly (1)
- Rotospray Drive Assembly Complete Less Spinner and Feed Tube (1)
- Smooth,Controlled Manual Dispensing (2)
- Snap-On End Caps Provide Tight Seal (3)
- Specifically Designed to Fit All Jensen Global Air Syringes (1)
- Specifically Designed with an O-Ring Seal to Fit All Jensen Global Air Syringes (14)
- The 98327 mounting bracket kit is designed for holding 97113 or 97114 valve when using Loctite® 3 or 4 axis robots. The "C" rail connection allows for more than one bracket to be used when using 3 axis robots. This allows for multiple dispense points (1)
- The HP Series High-Pressure Dispensing Tool Applies RTV Silicones, Epoxies, Medical Adhesives, Other Thick Fluids Through Dispensing Tips (1)
- The Loctite® Air Line Filter/Regulator/Gauge provides pressure regulation and inline air filtration to optimize the performance of hot melt applicators. The filter/regulator comes complete with integrated pressure gauge and mounting bracket. The pres (1)
- The SCARA Robot Requires an Operation Box to Run (1)
- Tip Caps Have A Large Knurled Gripping Surface That Simplifies Attachment (1)
- Twist-On Tip Cap Seals Syringe Barrel (1)
- Unique Design Works with All Manufacturer's Syringes, 360° Swivel on Adapter Head for Ease of Motion, Produces Repeatable Shots of Material and Requires Minimal Clean-Up (2)
- Vertical Syringe Stand Is A Convenient Way to Hold Syringes When Not In Use. Eliminates Placing Syringe on Work Surfaces and Protects Dispense Needles From Contamination (1)
289 items
-
3MHisco #: 00021200979279-31196 MFG #: 836RS-56SMAvailable to Order - 0 on Hand 10 days
- Brand Name: 3M Scotch-Brite
- Accessory Type: Lint Roller
- Special Features: Lint Roller Made with Scotch Adhesive
-
NordsonHisco #: 7703145-16022 MFG #: 7703145Availability: 4 In Stock 9 days
- Size: 50 mL
- Manufacturer: Nordson
-
Jensen GlobalHisco #: JG30A-G-27210 MFG #: JG30A-GAvailability: 14000 In Stock 7 days
- Accessory Type: Syringe Air Stopper
- For Use With: Pneumatically-operated air syringe barrels
- Size: 30/50cc
-
LoctiteHisco #: 1001830-30769 MFG #: 1001830 Alternate Part #:
- 410-2026
Available to Order - 0 on Hand 12 days- Accessory Type: Feed Line Tubing
- For Use With: Benchtop Peristaltic Dispenser
- Size: 2 mm O.D x 1.4 mm I.D x 65.6 ft
-
NordsonHisco #: 7012166-16022 MFG #: 7012166
Available to Order - 0 on Hand 7 days
- Brand Name: Nordson
- Accessory Type: Piston
- For Use With: Most Fluid Dispensers, Optimum Disposable Reservoir System
-
LoctiteHisco #: 88657-30769 MFG #: 88657 Alternate Part #:
- 97208
Available to Order - 0 on Hand 8 days- Brand Name: Loctite
- Accessory Type: Syringe Airline Adapter
- For Use With: Syringe Barrels Kit, Adhesive Dispensing Equipment
-
LoctiteHisco #: 142635-30769 MFG #: 142635 Alternate Part #:
- 97116
Available to Order - 0 on Hand 09/26/2019 10 days$794.31 / Each-EA- Brand Name: Loctite
- Color: Black
- Primary Color: Black
-
LoctiteHisco #: 218280-30769 MFG #: 218280 Alternate Part #:
- 98009
Ships direct from manufacturer 11 days$778.83 / Each-EA- Brand Name: Loctite
- Material: Acetal Copolymer
- Material Category: Plastic
-
NordsonHisco #: 7016906-16022 MFG #: 7016906
Available to Order - 0 on Hand 7 days
- Series: 2173B
- Accessory Type: Dispensing Tip
- For Use With: Fluid Dispenser
-
Jensen GlobalHisco #: JG10A-X-27210 MFG #: JG10A-X Alternate Part #:
- 535-1420
- 651-205
Available to Order - 0 on Hand 9 days$23.48 $23.60 / Each-EA- Brand Name: Jensen Global
- Series: X
- Accessory Type: Syringe Adapter
-
Jensen GlobalHisco #: JG30A-X-27210 MFG #: JG30A-X Alternate Part #:
- 651-208
Availability: 1 In Stock 11 days$23.48 $23.60 / Each-EA- Brand Name: Jensen Global
- Series: X
- Accessory Type: Syringe Adapter
-
NordsonHisco #: 7012196-16022 MFG #: 7012196
Available to Order - 0 on Hand 09/26/2019 10 days
- Brand Name: Nordson EFD Optimum
- Accessory Type: End Cap
- For Use With: Syringe Barrels
-
NordsonHisco #: 7703045-16022 MFG #: 7703045Availability: 4 In Stock 7 days
- Brand Name: TAH
- Accessory Type: Plunger
- For Use With: 50 ml Manual Cartridge Dispenser
-
LoctiteHisco #: 901459-30769 MFG #: 901459Available to Order - 0 on Hand 34 days
- Brand Name: Loctite
- Accessory Type: Syringe Holder
- For Use With: Syringes, Applicators
-
LoctiteHisco #: 1045339-30769 MFG #: 1045339
Availability: 5 In Stock 8 days
- Brand Name: Loctite
- For Use With: 1/4 in Fischbach adapter
- Size: 1/4 in NPT x Female Luer
-
LoctiteHisco #: 1244447-30769 MFG #: 1244447Available to Order - 0 on Hand 11 days
- Brand Name: Loctite
- Size: 2.1 mm I.D.
- Color: White
| Description | Brand Name | ESD-Safe | Series | Reviews | Availability | Price | U/M | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
3M Scotch-Brite | Available to Order - 0 on Hand 10 days |
$31.20
Quantity Pricing
|
/ Case-CA | |||||||||||||
|
Availability: 4 In Stock 9 days |
$24.75
Quantity Pricing
|
/ Each-EA | ||||||||||||||
|
Availability: 14000 In Stock 7 days |
$0.38607
$0.41
Quantity Pricing
|
/ Piece-PC | ||||||||||||||
|
Available to Order - 0 on Hand 12 days |
$114.88
Quantity Pricing
|
/ Each-EA | ||||||||||||||
7012166-16022
MFG #: 7012166
|
Nordson | Available to Order - 0 on Hand 7 days |
$25.42
Quantity Pricing
|
/ Box-BX | |||||||||||||
|
Loctite | Available to Order - 0 on Hand 8 days |
$42.61
Quantity Pricing
|
/ Package-PK | |||||||||||||
142635-30769
MFG #: 142635
|
Loctite | Available to Order - 0 on Hand 09/26/2019 10 days | $794.31 | / Each-EA | |||||||||||||
|
Loctite | Ships direct from manufacturer 11 days | $778.83 | / Each-EA | |||||||||||||
|
7016906-16022
MFG #: 7016906
|
2173B | Available to Order - 0 on Hand 7 days |
$87.00
Quantity Pricing
|
/ Box-BX | |||||||||||||
JG10A-X-27210
MFG #: JG10A-X
|
Jensen Global | X | Available to Order - 0 on Hand 9 days | $23.48 $23.60 | / Each-EA | ||||||||||||
JG30A-X-27210
MFG #: JG30A-X
|
Jensen Global | X | Availability: 1 In Stock 11 days | $23.48 $23.60 | / Each-EA | ||||||||||||
|
Nordson EFD Optimum | Available to Order - 0 on Hand 09/26/2019 10 days |
$16.08
Quantity Pricing
|
/ Box-BX | |||||||||||||
7703045-16022
MFG #: 7703045
|
TAH | Availability: 4 In Stock 7 days |
$3.10
Quantity Pricing
|
/ Each-EA | |||||||||||||
|
Loctite | Available to Order - 0 on Hand 34 days |
$28.05
Quantity Pricing
|
/ Each-EA | |||||||||||||
1045339-30769
MFG #: 1045339
|
Loctite | Availability: 5 In Stock 8 days |
$13.96
Quantity Pricing
|
/ Package-PK | |||||||||||||
|
Loctite | Available to Order - 0 on Hand 11 days |
$24.28
Quantity Pricing
|
/ Each-EA |
Add to Cart
We cannot add the specified quantity to your cart; only the available inventory or less can be purchased. The reason is either the product has been discontinued by the manufacturer or is a clearance/overstock item.
All available inventory has been added to your cart.
×
You have reached the maximum number of items (6).
Please 'Compare' or remove items.
×