Liquid Bath Calibrator, -30 TO 125C, 110V 50/60hz
Hisco #:1657611-19816
MFG #:1657611
Our Price: $10,712.00 PC
Manufacturer Lead Time When Not In Stock: 14 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1
The Fluke 1657611 can calibrate any type of sensor including short, square, or odd-shaped sensors, and has 8 set-point memory storage, ramp-rate adjust, and over-temperature safety cutout.
Fluke 1657611 Features:- World's smallest portable calibration baths can be transported with the fluid in them.
- Stable to ±0.03°C or better, depending on the fluid you use
- Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
- Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
- Problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator
- All models have RS-232 ports, come with Interface-it software, and can be used with MET/TEMP II software
- Brand: Fluke
- Product Type: Bath Analyzers
- Range: -22 ro 257°F (-30 to 125°C
- Stability: ±0.03°C at -25°C (oil, 5010), ±0.05°C at 125°C (oil, 5010)
- Accuracy: ±0.25°C
- Uniformity: ±0.02°C
- Resolution: 0.01°C/°F
- Heating Time: 77 to 212°F (25 to 100°C): 35 minutes
- Cooling Time: 77 to 13°F (25 to –25°C): 45 minutes
- Display: LED, Switchable °C or °F
- Well Size: 2.5" dia. x 5.5" deep (64 x 139 mm) (Access opening is 1.9" (48 mm) dia.)
Product Description
Technical Information
SDS/TDS
Back to top
Product Description
The Fluke 1657611 can calibrate any type of sensor including short, square, or odd-shaped sensors, and has 8 set-point memory storage, ramp-rate adjust, and over-temperature safety cutout.
Fluke 1657611 Features:- World's smallest portable calibration baths can be transported with the fluid in them.
- Stable to ±0.03°C or better, depending on the fluid you use
- Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
- Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
- Problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator
- All models have RS-232 ports, come with Interface-it software, and can be used with MET/TEMP II software
- Brand: Fluke
- Product Type: Bath Analyzers
- Range: -22 ro 257°F (-30 to 125°C
- Stability: ±0.03°C at -25°C (oil, 5010), ±0.05°C at 125°C (oil, 5010)
- Accuracy: ±0.25°C
- Uniformity: ±0.02°C
- Resolution: 0.01°C/°F
- Heating Time: 77 to 212°F (25 to 100°C): 35 minutes
- Cooling Time: 77 to 13°F (25 to –25°C): 45 minutes
- Display: LED, Switchable °C or °F
- Well Size: 2.5" dia. x 5.5" deep (64 x 139 mm) (Access opening is 1.9" (48 mm) dia.)
Technical Information
Brand: Fluke
Additional Resources
Our Price: $10,712.00 PC
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1