Liquid Bath Calibrator, -20 TO 150C

The Fluke 2645215 can calibrate any type of sensor including short, square, or odd-shaped sensors, and has 8 set-point memory storage, ramp-rate adjust, and over-temperature safety cutout.

• World's smallest portable calibration baths can be transported with the fluid in them.
• Stable to ±0.03°C or better, depending on the fluid you use
• Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
• Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
• Problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator
• All models have RS-232 ports, come with Interface-it software, and can be used with MET/TEMP II software

• Brand: Fluke
• Product Type: Bath Analyzers
• Range: -30 to 125°C (-22 to 257°F)
• Stability: ±0.03°C at -25°C (oil, 5010), ±0.05°C at 125°C (oil, 5010)
• Accuracy: ±0.25°C
• Uniformity: ±0.02°C
• Resolution: 0.01°C/°F
• Heating Time: 77 to 212°F (25 to 100°C): 35 minutes
• Cooling Time: 77 to 13°F (25 to –25°C): 45 minutes
• Display: LED, Switchable °C or °F
• Well Size: 2.5" dia. x 5.5" deep (64 x 139 mm) (Access opening is 1.9" (48 mm) dia.)