Hisco #:1657764-19816
MFG #:1657764
$
Manufacturer Lead Time When Not In Stock: 14 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1
The Fluke 1657764 industrial dual-block calibrator lets you calibrate at hot and cold temperatures simultaneously.
Fluke 1657764 Features:- Two independently controlled temperature blocks, one for heating and one for cooling with a combined range of -15 to 350°C
- Unique dual unit allows you to calibrate your sensor in the heated well while the cool well stabilizes; this eliminates the need to wait for multiple temperature points during calibration
- Each block is controlled by a precision Hart Scientific temperature controller
- Inserts are available to accommodate sensors of any size from 1/16" (1.6 mm) to 7/16" (11.1 mm)
- A single AC connection powers both temperature wells for convenience at the job site
- Brand: Fluke
- Product Type: Current Calibrators
- Well-to-Well Uniformity: ±0.1°C
- Display Resolution: 0.1
- Stabilization Times: 8 minutes
- Well Depth: 4” (102 mm)
- Removable Inserts: Two ¼" (6.4 mm) and 3/16" (4.8 mm) inserts included
- Power: 115 VAC (±10%), 50/60 Hz, 3 A, 250 W
- Dimensions: 7 x 10.5 x 9.75" (178 x 267 x 248 mm)
- Safety: Over Voltage (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1
Product Description
Technical Information
SDS/TDS
Back to top
Product Description
The Fluke 1657764 industrial dual-block calibrator lets you calibrate at hot and cold temperatures simultaneously.
Fluke 1657764 Features:- Two independently controlled temperature blocks, one for heating and one for cooling with a combined range of -15 to 350°C
- Unique dual unit allows you to calibrate your sensor in the heated well while the cool well stabilizes; this eliminates the need to wait for multiple temperature points during calibration
- Each block is controlled by a precision Hart Scientific temperature controller
- Inserts are available to accommodate sensors of any size from 1/16" (1.6 mm) to 7/16" (11.1 mm)
- A single AC connection powers both temperature wells for convenience at the job site
- Brand: Fluke
- Product Type: Current Calibrators
- Well-to-Well Uniformity: ±0.1°C
- Display Resolution: 0.1
- Stabilization Times: 8 minutes
- Well Depth: 4” (102 mm)
- Removable Inserts: Two ¼" (6.4 mm) and 3/16" (4.8 mm) inserts included
- Power: 115 VAC (±10%), 50/60 Hz, 3 A, 250 W
- Dimensions: 7 x 10.5 x 9.75" (178 x 267 x 248 mm)
- Safety: Over Voltage (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1
Technical Information
Brand: Fluke
Additional Resources
$
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1