TS30 Test Set with Piercing Pin

The Fluke Networks 30800001 is a telephone test/butt set with piercing pin. It is recognized as the industry standard for basic test sets; the TS30 Test Set provides superior quality at an affordable price. With its high impedance monitor for DataSafe operation, technicians can clip onto a line in monitor mode without disrupting existing traffic. Solid weatherproofing provides enhanced resistance to severe weather conditions

• Includes mute switch, last number redial, audible ringer, and hook flash button
• Safely drop from 20 feet
• Offers high impedance monitor mode
• Functions with either line polarity
• High current and over voltage protection

• Brand: Fluke Networks
• Dimensions: 10" x 2.83" x 3.34"
• Packaged Weight: 1.05 lbs
• Return Loss: >14 dB (ref 600 Ω)
• Line Current Range: 15 mA to 120 mA
• Resistance to Continuous Current: 275 Ω typical at 20 mA
• Monitor Mode Impedance: >120,000 Ω 300 Hz to 3400 Hz
• Pulsing Rate: 10 pps pps
• Open/Close Ratio: 60/40
• Inter-digit Interval: 800 ms %, -10%
• Resistance During Pulse Open: > 200,000 Ω
• Protection Against Alternating Current Overvoltage: The TS30 survives up to 250 Vrms across its test leads
• Peak Acoustic Output of the Receiver: <120 dBspl
• DTMF Output Tone Frequencies Tone Frequency Error: per ITU-T Q.23 1.5% Maximum
• High Group Low Group Tone Level: -4 dBm (into 600 Ω) -6 dBm (into 600 Ω)
• High vs Low Tone Difference: 2dB +1db
• Memory Capacity Memory Retention: 23 digits 8-minutes nominal
• Flash Duration: 600 ms 100 ms
• Ringer Loudness: > 70 dBA at 1 meter
• Ringer Equivalent (REN): 0.14
• Operating Temperature: -4 °F to +140 °F
• Storage Temperature: -40 °F to +151 °F
• Relative Humidity: 5% to 95%