Zip-Chem® Calla® 602 LF Non-Emulsion Type Cleaner for Aqueous Parts Washers, 1 Gallon

The Zip-Chem 009437 is a non-emulsion type cleaner for aqueous parts washers.

• A concentrated cleaner for use in aqueous parts washing cabinets
• Use at 5% dilution
• Low foaming at temperatures as low as 140°F (60°C)
• Low VOC formulation
• Short term emulsifier
• Safe on aircraft substrates including magnesium, IVD aluminum coated steel, cadmium plated steel, aluminum, titanium, and other high strength materials
• Removes dirt and grease from parts with cycle times as low as 3 minutes
• Use in the strictest air quality control regulations
• Allows for easy separation of the greases and oils from the waste stream

• Use in aqueous parts washing cabinets
• The operating temperature of Calla® 602LF is 140°F-160°F (60°C-71°C)
• For optimum cleaning efficiency, the recommended dilution of the product is 5%
• 100 Gallon (378.5L) Tank Parts Washer: Add 5 gallons (18.9L) of Calla® 602LF and top off by adding the remaining water balance
• Cleaning cycle time is usually 3-15 minutes
• Apply Calla® 602LF Defoamer to solution to reduce foam if too much of it is generated

• Meets Mil-C-29602 except section 3.7 (pH)
• NSN: 6850-01-513-5230 (1 Gallon (3.8L) Bottle)
• NSN: 6850-01-513-5237 (5 Gallon (18.9L) Pail)
• NSN: 6850-01-513-5233 (55 Gallon (208L) Drum)
• Source Control Drawing 9825019-17, -19 & -21 Rev. C (Meets all requirements)
• T.O. 4W-1-161 (Meets all requirements)
• T.O. 4B-1-32 (Meets all requirements)
• T.O. 4S-1-182 (Meets all requirements)