3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010, Blue, 490 mL Duo-Pak, 6/case

DP8010-BL-490ML-31180 MFG #: DP8010
$422.20 / CQ
Available to Order - 0 on Hand
  • Brand Name: Scotch-Weld™
  • Product Type: Acrylic Adhesive
  • Material Compatibility: LSE Plastics; Thermoplastics; Composites; Metals
  • Acrylic Type: Acrylic
  • Color: Blue
  • Primary Color: Blue
  • Physical Form: Liquid
  • Cure Time: 24 h
  • Viscosity Measurement: 25000 to 35000 cPs
  • Shelf Life: 540 Days From Date of Manufacture
  • Chemical Composition: Synthetic Rubber Oligomer (NJTS Reg No 04499600-7168); Polyfunctional Aziridine; Amine Borane Complex; Amorphous Silica
  • Specific Gravity: 0.95 to 1.05
  • VOCs Content: Part A:0 %; Part B:0.6 %
  • Flash Point: Part A:>+206 °F; Part B:+223 °F
  • Odor: Mild Acrylic
  • Mix Ratio: 10:1
  • Container Capacity: 490 ml
  • Container Type: Cartridge
  • Applications: Bonding Composite Materials; Mounting and Trim Attachment; Panel to Frame/Stiffner to Panel Assembly; Sealing; Potting and Encapsulating; Small Joint Assembly; Construction; Consumer Goods; Electronics; General Industrial; Medical; Metalworking; Mili
  • Package Quantity: 6 EACH

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications


Joining plastics to metals, such as in the manufacture or repair of appliances
Bonding low surface energy plastics without priming
Impact resistance composite bonding
Manufacture or repair of various sporting goods equipment
Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)


Our 3M™ Scotch-Weld ™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

3M DP8010 Features:
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 minute work life with 60 minute handling strength
  • Strong adhesive can replace screws, rivets and welding
3M DP8010 Specifications:
  • Color: Blue
  • Hardness: 55-60 Shore D
  • Package Quantity: 6 EACH
  • Product Type: Acrylic Adhesive