Mil Spec Type III Diamond Plate Surface, Slip Resistant Swichboard Matting, Gray, 3' wide x 5' long x 3/16" thick

MILSPEC-III-X5GY-41325 MFG #: MILSPEC-III-X5GY
$0.00 / EA
Ships direct from manufacturer
  • Brand Name: Rhino Mats
  • Product Type: Switchboard Matting
  • Material: Rubber
  • Material Category: Rubber
  • Color: Gray
  • Primary Color: Gray
  • Dimensions: 3 ft x 5 ft x 3/16 in
  • Length: 60.0 in.
  • Width: 36.0 in.
  • Height: 0.1875 in.
  • Thickness: 3/16 in
  • Dielectric Strength: 30000 V ac
  • Surface Texture Type: Diamond Plate
  • Standards Met: ASTM D178; ANSI J6.7
  • Applications: Electrical

The Rhino Mats MILSPEC-III-X5GY is a Type III slip-resistant, fire-retardant, diamond plate switchboard matting. Each switchboard mat is electrically insulated and conforms to Mil-DTL-15562. This specification has been approved for use of the Navy, Marine Corps and all other agencies of the department of defense. The type III matting is used as a portable runner in front of equipment and on workbenches. Each switchboard matting is tested to ASTM D178/ANSI J6.7. Certification is engraved on the back of the matting.

Rhino Mats MILSPEC-III-X5GY Features:
  • Dielectric Test Voltage 30,000 VAC
  • Proof Tested over entire surface at 15,000 VAC
  • Recommended Maximum Use Voltage 3,000 VAC
  • Excellent chemical resistance to many commercial and industrial chemicals
Rhino Mats MILSPEC-III-X5GY Specifications:
  • Tensile Strength Original: 800 psi
  • Following Sulfuric Acid Aging (Fed Std 601 Method 7111): 70% of original
  • Following Oxygen Bomb Aging (Fed Std 601 Method 7111): 80% of original
  • Following Ultra Violet Aging: 65% of original
  • Ultimate Elongation: 100% minimum
  • Permanent set (after 100% elongation): 25% maximum
  • Hardness: 65 Shore A Minimum
  • Flexibility (Fed Std 501, Method 3111): No Cracking
  • Fire Resistance (MIL-STD 1623 and Fed Std 501 Method 6411): 10” maximum char for 4-minute combustion
Pack: Each
QTY