Work Station Monitoring Kit, ESD, with Light Blue Table Mat, 24" x 48"
Hisco #:10092954
MFG #:10092954
Item must be ordered in multiples of 1
| Quantity | Price | Save |
|---|---|---|
| 1 | 159.30 | |
| 3 | 152.76 | Save |
The Techni-Pro 10092954 contains a light blue, two layer, 0.08"" thick rubber mat with a smooth surface, 10mm snaps and a common point ground cord.
Meets or exceeds the requirements of ANSI/ESD S20.20 per ANSI/ESD STM4.1
This ESD matting is rated to 190°F (87°C). Please note - it is heat resistant, not heat proof. It will withstand exposure to high temperatures, but it is dependent on exposure time.
Includes:
- 24"" x 48"" light blue rubber mat with grounding hardware
- Wrist strap (elastic band, 7mm snap, 12 foot cord) - 758ST9806
- Single wire continuous monitor - 758ST9201
Features:
- Elongation: >300%
- Resistance: 10^6 – 10^8
- Resistance category: Dissipative
- Mat has a black conductive bottom layer and static dissipative colored top layer – resistance of less than 1.0×10^9 ohms
- Monitor is designed to measure resistance of the operator’s path to ground
- Monitor will trigger either when operator falls out of spec, becomes disconnected, or ground is lost
Continuous monitor
This package also contains a single operator continuous monitor. It is designed to monitor resistance of the operator’s path to ground and triggers either when the operator falls out of spec, becomes disconnected, or ground is lost.
It supports 1 operator via single wire ESD wrist strap and has universal support for standard 4mm banana type grounding coil cords. A multi-color LED and piezo buzzer provide the operator with both visual and audible feedback in the event of a ground system fault.
It features a fixed resistor system - go/no go. Low Fail <675k, Pass >750k to <8meg, Fail High >8.5meg, ± 10%
Product Description
The Techni-Pro 10092954 contains a light blue, two layer, 0.08"" thick rubber mat with a smooth surface, 10mm snaps and a common point ground cord.
Meets or exceeds the requirements of ANSI/ESD S20.20 per ANSI/ESD STM4.1
This ESD matting is rated to 190°F (87°C). Please note - it is heat resistant, not heat proof. It will withstand exposure to high temperatures, but it is dependent on exposure time.
Includes:
- 24"" x 48"" light blue rubber mat with grounding hardware
- Wrist strap (elastic band, 7mm snap, 12 foot cord) - 758ST9806
- Single wire continuous monitor - 758ST9201
Features:
- Elongation: >300%
- Resistance: 10^6 – 10^8
- Resistance category: Dissipative
- Mat has a black conductive bottom layer and static dissipative colored top layer – resistance of less than 1.0×10^9 ohms
- Monitor is designed to measure resistance of the operator’s path to ground
- Monitor will trigger either when operator falls out of spec, becomes disconnected, or ground is lost
Continuous monitor
This package also contains a single operator continuous monitor. It is designed to monitor resistance of the operator’s path to ground and triggers either when the operator falls out of spec, becomes disconnected, or ground is lost.
It supports 1 operator via single wire ESD wrist strap and has universal support for standard 4mm banana type grounding coil cords. A multi-color LED and piezo buzzer provide the operator with both visual and audible feedback in the event of a ground system fault.
It features a fixed resistor system - go/no go. Low Fail <675k, Pass >750k to <8meg, Fail High >8.5meg, ± 10%
Technical Information
Item must be ordered in multiples of 1