Hisco #:60019661-100560
MFG #:60019661
Item must be ordered in multiples of 24
| Quantity | Price | Save |
|---|---|---|
| 72 | 33.12 | Save |
The Wacker 60019661 ELASTOSIL E43 TRANSPARENT is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture.
It shows excellent mechanical properties, has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Wacker 60019661 Features:- Moderately self-levelling
- Excellent adhesion on cured silicone rubber
- High-tear grade
- Recommended service temperature from -45-deg C to +180-deg C
- Max. recommended short term peak temperature exposure 200-deg C
- Excellent mechanical properties
- Solvent-free
Product Description
The Wacker 60019661 ELASTOSIL E43 TRANSPARENT is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture.
It shows excellent mechanical properties, has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Wacker 60019661 Features:- Moderately self-levelling
- Excellent adhesion on cured silicone rubber
- High-tear grade
- Recommended service temperature from -45-deg C to +180-deg C
- Max. recommended short term peak temperature exposure 200-deg C
- Excellent mechanical properties
- Solvent-free
Technical Information
Item must be ordered in multiples of 24


