US_HISCO_SPIRE
3M logo

3M™ Adhesion Promoter 4298, Sponge Applicator Packet, 2.5 cc, 500 Each/Case

Hisco #:00021200275715-31179

MFG #:218256O

Made in the USA
Non-cancellable. Orders for this product cannot be cancelled after the order is placed. But once received, the items may be returned pending prior approval from Hisco customer service.
Our Price: $2.18 Piece-PC
List Price: 2.54 PC
Manufacturer Lead Time When Not In Stock10 days
Minimum Order QTY: 500
Item must be ordered in multiples of 500
QuantityPriceSave
15002.15Save 1%

3M™ Adhesion Promoter 4298 is a versatile liquid primer specifically formulated for enhancing the adhesion of 3M™ Acrylic Foam Tapes to low surface energy substrates common on interior and exterior automotive trim and parts. This fast-drying adhesion promoter works with most LSE plastics including PPO, PP, PC, PC + ABS and others.

Versatile Adhesion Promoter for LSE Plastics
Formulated specifically for use with 3M™ Acrylic Foam Tapes, our 3M™ Adhesion Promoter 4298 promotes a permanent bond with a wide range of low surface energy plastics and other materials commonly used in automotive OEM. It works well with PPO, polypropylene (PP) as well as polycarbonate (PC) and PC + ABS. It dries in 30 to 90 seconds for fast and efficient application. Once it’s dry, it’s ready to accept attachment tape. The adhesion promoter can also be cleaned from most surfaces using acetone solvent. The 3M™ Adhesion Promoter 4298 is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes.

Easy to Apply and Use
3M™ Adhesion Promoter 4298 is supplied in an easy-to-use sponge applicator packet. This packet tears open easily across the top to expose the sponge applicator, and the bottom section of the packet is excellent for no-mess application. The adhesion promoter can also be applied using a gravity feed wipe, knurled roller, sprayer, or a felt-tipped or similar applicator.  3M™ Adhesion Promoter 4298 can be cleaned up with methylethyl ketone (MEK) or acetone solvents (be careful with solvents on plastics).

Recommended Applications


? LSE plastic trim and parts
Automotive dash and interior trim
Injection-molded side body side moldings
Automotive claddings
For use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes


Better Science for Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations - and all of it goes into each of our products for automotive OEMs and Tier Suppliers, like 3M™ Adhesion Promoter 4298.

3M 218256O Features:
  • Ideal for prepping substrate surface for effective bonding of attachment tape to automotive parts
  • Suitable for use on PPO, PC and other LSE substrates in automotive applications
  • Dries in 30 - 90 seconds
  • Easy to apply directly from sponge applicator packet
  • Formulated for use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes
3M 218256O Specifications:
  • Color: Yellow
  • Package Quantity: 500 EACH
  • Part Number: 27571
  • Product Type: Accessory

Product Description

3M™ Adhesion Promoter 4298 is a versatile liquid primer specifically formulated for enhancing the adhesion of 3M™ Acrylic Foam Tapes to low surface energy substrates common on interior and exterior automotive trim and parts. This fast-drying adhesion promoter works with most LSE plastics including PPO, PP, PC, PC + ABS and others.

Versatile Adhesion Promoter for LSE Plastics
Formulated specifically for use with 3M™ Acrylic Foam Tapes, our 3M™ Adhesion Promoter 4298 promotes a permanent bond with a wide range of low surface energy plastics and other materials commonly used in automotive OEM. It works well with PPO, polypropylene (PP) as well as polycarbonate (PC) and PC + ABS. It dries in 30 to 90 seconds for fast and efficient application. Once it’s dry, it’s ready to accept attachment tape. The adhesion promoter can also be cleaned from most surfaces using acetone solvent. The 3M™ Adhesion Promoter 4298 is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes.

Easy to Apply and Use
3M™ Adhesion Promoter 4298 is supplied in an easy-to-use sponge applicator packet. This packet tears open easily across the top to expose the sponge applicator, and the bottom section of the packet is excellent for no-mess application. The adhesion promoter can also be applied using a gravity feed wipe, knurled roller, sprayer, or a felt-tipped or similar applicator.  3M™ Adhesion Promoter 4298 can be cleaned up with methylethyl ketone (MEK) or acetone solvents (be careful with solvents on plastics).

Recommended Applications


? LSE plastic trim and parts
Automotive dash and interior trim
Injection-molded side body side moldings
Automotive claddings
For use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes


Better Science for Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations - and all of it goes into each of our products for automotive OEMs and Tier Suppliers, like 3M™ Adhesion Promoter 4298.

3M 218256O Features:
  • Ideal for prepping substrate surface for effective bonding of attachment tape to automotive parts
  • Suitable for use on PPO, PC and other LSE substrates in automotive applications
  • Dries in 30 - 90 seconds
  • Easy to apply directly from sponge applicator packet
  • Formulated for use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes
3M 218256O Specifications:
  • Color: Yellow
  • Package Quantity: 500 EACH
  • Part Number: 27571
  • Product Type: Accessory

Technical Information

Brand3M
Series4298
Chemical CompositionCyclohexane, Xylene, Ethyl Enzene, Ethyl Alcohol, Acrylate Polymer, Chlorinated Rubber, Ethyl Acetate, Epoxy Resin, Methyl Alcohol, Toluene
ApplicationsAutomotive
ColorYellow
For Use With3M Acrylic Foam Tapes
Physical FormLiquid
TypeAdhesion Promotor
Container Capacity2.5cc
Container TypePacket
OdorSolvent
Primary ColorYellow
Shelf Life730 Days From Date of Manufacture
Flash Point1°F
Package Quantity500 EACH
Specific Gravity0.82
Viscosity Measurement30 to 40cP
Weight: 2
Country Of Origin: US

Additional Resources

Our Price: $2.18 Piece-PC
List Price: 2.54 PC
 
Minimum Order QTY: 500
Item must be ordered in multiples of 500
North America's Premier Distributor of Mission Critical Materials ® © 2008-  Copyright Hisco, Inc. Industrial Distributor. All rights reserved