Fixmaster® Steel Liquid
235618-30769
MFG #: 235618
$227.29
/ KT
Available to Order - 0 on Hand
- Brand Name: Loctite
- Product Type: Epoxy Adhesive
- Hardness: 84Shore D
- Material Compatibility: Steel, Metal
- Color: Part A:Gray; Part B:Blue
- Primary Color: Part A:Gray; Part B:Blue
- Mix Ratio: 9.5:1
- Physical Form: Part A:Paste; Part B:Liquid
- Cure Time: 6h
- Viscosity Measurement: Part A:70000 to 85000; Part B:250 to 350mPa/s
- Chemical Composition: Part A:Diiron Trioxide, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Manganese, Gamma-Glycidoxypropyl Trimethoxysilane; Part B:Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diet
- Specific Gravity: Part A:2.35; Part B:0.99
- VOCs Content: <10g/L
- Odor: Part A:Mild; Part B:Ammoniacal
- Cure Type: Room 25°C
- Elongation at Break: 0.61%
- Gel Time: 30 to 40min
- Maximum Operating Temperature: +225°F
- Minimum Operating Temperature: -20°F
- Container Capacity: 4lb
- Applications: Bonding, Forming Molds
- Package Quantity: 1CA
The Loctite 235618 is a epoxy adhesive with a mix ratio of 9.5:1.
The Loctite 235618 Features:- Castable liquid-repairs hard to reach areas
- Rebuilds worn parts fast-limits downtime
- High steel content-cures to a metal-like finish
- Superior adhesion-bonds well to all metal substrates
- Brand: Fixmaster®
- Product Type: Epoxy Adhesive
- Hardness: 84Shore D
- Material Compatibility: Steel, Metal
- Color: Part A:Gray Part B:Blue
- Primary Color: Part A:Gray Part B:Blue
- Mix Ratio: 9.5:1
- Physical Form: Part A:Paste Part B:Liquid
- Cure Time: 6h
- Viscosity Measurement: Part A:70000 to 85000 Part B:250 to 350mPa/s
- Chemical Composition: Part A:Diiron Trioxide, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Manganese, Gamma-Glycidoxypropyl Trimethoxysilane Part B:Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diethylene
- Specific Gravity: Part A:2.35 Part B:0.99
- VOCs Content: <10g/L
- Odor: Part A:Mild Part B:Ammoniacal
- Cure Type: Room 25°C
- Elongation at Break: 0.61%
- Gel Time: 30 to 40min
- Tensile Strength: 4530psi
- Maximum Operating Temperature: +225°F
- Minimum Operating Temperature: -20°F
- Container Capacity: 4lb
- Applications: Bonding, Forming Molds
- Package Quantity: 1CA