LOCTITE® EA 3501HT Single Component Epoxy Seam Sealant, 25kg Pail

The Loctite EA 3501HT is a single part system that requires a heated cure, as an epoxy seam sealant. It was intentionally designed for use on either primed or bare, oily metal, in preparation for high temperature paint bake processing which would include metal pre-treatment, e-coat/primer paint and powder/top-coat stages. This epoxy is well-suited to work with most metal pre-treatment processes, and is able to maintain its original physical properties and performance even after going through a paint bake process where temperatures reach up to 437°F (225°C). Loctite EA 3501HT is an amazingly versatile epoxy and is suitable to be used on a wide range of substrate gauges which would include thin sheet metals as well as rigid castings and extrusions. Common applications for the use of this epoxy include the sealing of metal seams between welded/bonded joints, overlapping joints, butt joints, as well as any other visible seam which would require sealing.

• Excellent Option for Use on Primed or Bare Oily Metal
• Exceptional Performance Even After High Temp Baking Processes (up to 437°F)
• Great for Seam Sealing Applications
• Versatile and Used on a Wide Range of Substrates (Thin Sheet Metals, Rigid Castings, & Extrusions)
• Single Part System - No Mixing Required
• Ideally suited for Powder and E-Coat Applications

• Series: EA 3501HT
• Product Type: Epoxy
• Chemical Type: Epoxy
• Max. Storage Temp.: 77°F (25°C)
• Min. Storage Temp.: 36°F (2°C)
• Cure: Heat Cure
• Specific Gravity: 1.35 @ 73°F (23°C)