Araldite™ 2014-3 Two Component Heat Resistant Epoxy Adhesive, Gray, 200 ml/Cartridge
Hisco #:5140308-53860
MFG #:5140308
Item must be ordered in multiples of 6
This item is hazardous and may be subject to an additional handling fee.
The Huntsman 5140308 ARALDITE® 2014-3 (bulk-pack reference: ARALDITE® AW 139-2 / Hardener HW 5323-1) is a two-component, room-temperature curing, sag-resistant paste adhesive with high strength and good environmental and chemical resistance. Formulated without intentionally added BPA and not subject to CMR labeling, it ensures durable bonds, worker safety and regulatory compliance. It can be used for bonding metals, electronic components, composite materials and many other applications where higher temperatures or aggressive environmental conditions are encountered in service.
Huntsman 5140308 Features:- Low shrinkage for long-lasting bonds
- High temperature and chemical resistance
- Very resistant to water and to a wide variety of chemicals
- Gap filling, non-sagging up to 5mm thickness
- No CMR. No BPA.
- 120 mins Working time at RT
- 4 hrs Fixture time at RT
- 45 MPa Tensile strength
- 3,700 MPa Tensile modulus
- ca. 1.6% Elongation at break
- 140°C Maximum continuous operating temperature
- Dark grey paste
Product Description
This item is hazardous and may be subject to an additional handling fee.
The Huntsman 5140308 ARALDITE® 2014-3 (bulk-pack reference: ARALDITE® AW 139-2 / Hardener HW 5323-1) is a two-component, room-temperature curing, sag-resistant paste adhesive with high strength and good environmental and chemical resistance. Formulated without intentionally added BPA and not subject to CMR labeling, it ensures durable bonds, worker safety and regulatory compliance. It can be used for bonding metals, electronic components, composite materials and many other applications where higher temperatures or aggressive environmental conditions are encountered in service.
Huntsman 5140308 Features:- Low shrinkage for long-lasting bonds
- High temperature and chemical resistance
- Very resistant to water and to a wide variety of chemicals
- Gap filling, non-sagging up to 5mm thickness
- No CMR. No BPA.
- 120 mins Working time at RT
- 4 hrs Fixture time at RT
- 45 MPa Tensile strength
- 3,700 MPa Tensile modulus
- ca. 1.6% Elongation at break
- 140°C Maximum continuous operating temperature
- Dark grey paste
Technical Information
Item must be ordered in multiples of 6