LinkIQ 200 Duo Kit And Fiber Kit, 1G/10G

Fiber Media Converter (FMC)

• Connects to 1 Gb/s (1000BASE-SX, 1000BASE-LX) and 10 Gb/s (10GBASE-SR, 10GBASE-LR) fiber Ethernet ports through a media converter and SFP (1G/10G) using single-mode or multimode optic fiber cables

• Compatible with LinkIQ Cable+Network Tester and LinkIQ Duo Cable+Wi-Fi+Network Tester

• Fiber optic network testing features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number)

• Battery bank for portable operation

Test Fiber Optic Network Ports With Any LinkIQ Tester

The LinkIQ Cable+Wifi+Network Tester Kit and Fiber Media Converter Kit is the solution to verify cable, wifi and fiber performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T). ). Connect to copper or fiber switch ports for: (IP address, name, port / VLAN number, and advertised data rates); Ethernet Alliance-certified Power over Ethernet testing (hardware/software negotiation and loaded voltage and power tests). Additional features include FiberLert, Quick Clean, cable toning, port blink, optional remote office locators, and the ability to manage results via LinkWare PC.

Port Connections And Verifications

When testing a connection through the FMC, the “Network” test provides results that can tell you if you have an Ethernet connection to the device at the far end (typically a switch) and if you can send IP traffic to targets at the far end. The result you get looks something like this mobile's screen.

Compatible with LinkIQ and LinkIQ Duo Testers

SFPs (single-mode and multimode):

• 1000BASE-LX single-mode

• 1000BASE-SX multimode

• 10GBASE-LR single-mode

• 10GBASE-SR multimode

Fiber Media Converters (FMC):

• 1Gb/s media converter

• 10 Gb/s media converter

LIQ-DUO Cable+Wi-Fi+Network Tester

The LinkIQ Tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T). LinkIQ also provides IPv4 and v6 ping; nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates); Ethernet Alliance-certified Power over Ethernet testing (hardware/software negotiation and loaded voltage and power tests). Wi-Fi analysis to Wi-Fi 6E, including networks, channels, and access points. Additional features include cable toning, port blink, optional remote office locators, and the ability to manage results via LinkWare PC.

LinkIQ Duo Cable+Network Tester Features

1. RJ45 Port for connection to cable or switch port

2. Internal antenna for Wi-Fi radio supporting 2.4, 5, and 6 GHz bands (LinkIQ Duo only)

3. PASS/FAIL frequency-based measurement results

4. Touch screen color display

5. Length measurement shows distance to termination, open or short

6. Wiremap shows type and location of fault (miswires, split pairs, shorts, breaks)

7. USB-C port for data export, software updates and charging

8. Cable "Speedometer" provides bandwidth information up to 10G

9. Save up to 1000 test results on the unit and export to LinkWare PC

What's in the Box

LIQ-DUO-KIT-FMC Includes:

• LinkIQ Duo Cable+Wi-Fi+Network Tester

• FMC-10G Media converter

• FiberLert Live Fiber Detector

• 1.25 mm Quick Clean Cleaner

• Power Bank Battery

• USB C to Media Converter Cable

• Carry case

• 2X SFP transceiver

• 2X fiber optic patch cord

• Ethernet cable

• Quick reference