US_HISCO_SPIRE
SCS logo

724 Continuous Wrist Strap Workstation Monitor for SCS Dual Conductor Wrist Straps

Hisco #:724-15078

MFG #:724

Our Price: $251.28 EA
800 Arriving From Manufacturer On: 08/08/2023
Manufacturer Lead Time When Not In Stock152 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
QuantityPriceSave
1251.28
3245.98Save 2%

The SCS 724 is a dual conductor wrist strap monitor that works with either one or two workstations. This monitor provides instant notification when a wrist strap malfunctions or when it is being worn improperly. The SCS 724 continuously pulses a signal which is returned to the monitor through a special wrist strap and cord that contains two separate sets of independent conductors. Designed to monitor the operation of the wrist strap grounding systems of two operators by using a DC current source to measure a loop electrical resistance. The SCS 724 monitor takes a resistance measurement by passing a very small pulsed signal down one conductor in the cord into one side of the wrist band, from the band through the skin of the wearer, back into the second side of the wrist band, and back down the second conductor in the cord to the monitor. Switches located on the side of the monitor allows for selection of test voltages (9v or 16v) and resistance limits (10 or 35 megohms).

SCS 724 Includes:
  • (1) 724 Monitor
  • (1) 732 Remote dual conductor jack with connection cable
  • (1) Mounting hardware package with: (4) misc. wood screws, (2) zip ties, and (2) adhesive pads
  • (1) TM724P AC adapter power supply (North American)
  • (1) 724PINCON Two-wire connector
  • (2) Grounding cords: (1) 2380D Black with low profile table connection and (1) green with yellow stripe for earth ground
  • (2) Adhesive label operating instructions (1-English, 1-Spanish)
  • (1) Instruction booklet
  • (1) Manufacturer's Certificate of Conformance traceable to NIST

Note: The 724 Monitor can be used with the 2300 series dual conductor wrist straps (not included).

SCS 724 Features:
  • Monitors primary worker, wrist strap, work surface ground connection
  • Monitors visitor to work station
  • Audible and visible alarms
  • Adjustable volume on audible alarms
  • Optional audible alarm for mat
  • Includes operators resistance in test circuits
  • Passive system activation
  • Test voltage & resistance limit switches
  • Redundant conductors offer superior protection
  • Eliminates audits and recordkeeping
  • Compact: 6-1/2" x 3-1/4" x 1-3/8"
  • Monitors resistor by-pass
  • Optional Splitter Kit 733 allows for grounding/monitoring two individuals at two separate work stations

Product Description

The SCS 724 is a dual conductor wrist strap monitor that works with either one or two workstations. This monitor provides instant notification when a wrist strap malfunctions or when it is being worn improperly. The SCS 724 continuously pulses a signal which is returned to the monitor through a special wrist strap and cord that contains two separate sets of independent conductors. Designed to monitor the operation of the wrist strap grounding systems of two operators by using a DC current source to measure a loop electrical resistance. The SCS 724 monitor takes a resistance measurement by passing a very small pulsed signal down one conductor in the cord into one side of the wrist band, from the band through the skin of the wearer, back into the second side of the wrist band, and back down the second conductor in the cord to the monitor. Switches located on the side of the monitor allows for selection of test voltages (9v or 16v) and resistance limits (10 or 35 megohms).

SCS 724 Includes:
  • (1) 724 Monitor
  • (1) 732 Remote dual conductor jack with connection cable
  • (1) Mounting hardware package with: (4) misc. wood screws, (2) zip ties, and (2) adhesive pads
  • (1) TM724P AC adapter power supply (North American)
  • (1) 724PINCON Two-wire connector
  • (2) Grounding cords: (1) 2380D Black with low profile table connection and (1) green with yellow stripe for earth ground
  • (2) Adhesive label operating instructions (1-English, 1-Spanish)
  • (1) Instruction booklet
  • (1) Manufacturer's Certificate of Conformance traceable to NIST

Note: The 724 Monitor can be used with the 2300 series dual conductor wrist straps (not included).

SCS 724 Features:
  • Monitors primary worker, wrist strap, work surface ground connection
  • Monitors visitor to work station
  • Audible and visible alarms
  • Adjustable volume on audible alarms
  • Optional audible alarm for mat
  • Includes operators resistance in test circuits
  • Passive system activation
  • Test voltage & resistance limit switches
  • Redundant conductors offer superior protection
  • Eliminates audits and recordkeeping
  • Compact: 6-1/2" x 3-1/4" x 1-3/8"
  • Monitors resistor by-pass
  • Optional Splitter Kit 733 allows for grounding/monitoring two individuals at two separate work stations

Technical Information

BrandSCS
ApplicationsIndoor Use
AvailabilityIn Stock
Depth1.37in
Dimensions6.5 x 3.12 x 1.37in
For Use WithWrist Strap
Height2.85 in.
IncludesOperator Remote, Power Adapter, Ground Cord, Mat Monitor Cord, Two Wire Connector, 4 Mounting Screws, 2 Wire Management Clips, Certificate of Calibration
Length8.0 in.
Maximum Operating Temperature+110°F
Minimum Operating Temperature+50°F
Package Quantity1PH
Product TypeMonitor
Standards MetcULus Listed, FC
Voltage Rating100 to 120V ac
Width5.55 in.
Monitor TypeContinuous
Weight: 2.135
Country Of Origin: 

Additional Resources

Our Price: $251.28 EA
 
Minimum Order QTY: 1
Item must be ordered in multiples of 1
North America's Premier Distributor of Mission Critical Materials ® © 2008-  Copyright Hisco, Inc. Industrial Distributor. All rights reserved