Thermal Conductive Epoxy Adhesive, Electrical Insulating, Slow Cure, Two 3mL Syringes
Hisco #:8329TCS-6ML-33018
MFG #:8329TCS-6ML
Our Price: $24.04 EA
Manufacturer Lead Time When Not In Stock: 6 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1
This item is hazardous and may be subject to an additional handling fee.
The MG Chemicals 8329TCS-6ML is a thermally conductive epoxy adhesive with a mix ratio of 1:1.
The MG Chemicals 8329TCS-6ML Features:- Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
- Excellent 1.44 W/(mK) thermal conductivity
- Easy 1:1 mix ratio
- Adheres to most electronic substrates
- Strong water and chemical resistance to brine, acids, bases and aliphatic hydrocarbons
- Product Type: Thermally Conductive Epoxy Adhesive
- Hardness: 62Shore D
- Color: Dark Gray
- Primary Color: Gray
- Mix Ratio: 1:1
- Physical Form: Liquid
- Cure Time: 20min
- Viscosity Measurement: Part A:8800 Part B:780Pa/s
- Shelf Life: ≥3yr
- Chemical Composition: Part A:Aluminum Oxide, Zinc Oxide, Methylenebis, Epoxy Phenol Novalak Resin, Boron Nitride Part B:Aluminum Oxide, Zinc Oxide, Fatty acids, Polymers, Boron Nitride
- Specific Gravity: Part A:2.41 Part B:2.48
- Odor: Part A:Slight Part B:Ammonia
- Cure Type: Room Temperature
- Dielectric Strength: 168 165V/mil
- Elongation at Break: 7%
- Tensile Strength: 11.4N/mm²
- Maximum Operating Temperature: +302°F
- Minimum Operating Temperature: -40°F
- Container Capacity: 6ml
- Container Type: Syringe
- Applications: Electrical and Electronics, Heat Sink Bonding, High-Powered LED Adhesive
Product Description
Technical Information
SDS/TDS
Back to top
Product Description
This item is hazardous and may be subject to an additional handling fee.
The MG Chemicals 8329TCS-6ML is a thermally conductive epoxy adhesive with a mix ratio of 1:1.
The MG Chemicals 8329TCS-6ML Features:- Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
- Excellent 1.44 W/(mK) thermal conductivity
- Easy 1:1 mix ratio
- Adheres to most electronic substrates
- Strong water and chemical resistance to brine, acids, bases and aliphatic hydrocarbons
- Product Type: Thermally Conductive Epoxy Adhesive
- Hardness: 62Shore D
- Color: Dark Gray
- Primary Color: Gray
- Mix Ratio: 1:1
- Physical Form: Liquid
- Cure Time: 20min
- Viscosity Measurement: Part A:8800 Part B:780Pa/s
- Shelf Life: ≥3yr
- Chemical Composition: Part A:Aluminum Oxide, Zinc Oxide, Methylenebis, Epoxy Phenol Novalak Resin, Boron Nitride Part B:Aluminum Oxide, Zinc Oxide, Fatty acids, Polymers, Boron Nitride
- Specific Gravity: Part A:2.41 Part B:2.48
- Odor: Part A:Slight Part B:Ammonia
- Cure Type: Room Temperature
- Dielectric Strength: 168 165V/mil
- Elongation at Break: 7%
- Tensile Strength: 11.4N/mm²
- Maximum Operating Temperature: +302°F
- Minimum Operating Temperature: -40°F
- Container Capacity: 6ml
- Container Type: Syringe
- Applications: Electrical and Electronics, Heat Sink Bonding, High-Powered LED Adhesive
Technical Information
Brand: MG Chemicals
Availability: In Stock
Weight: 0.07
Country Of Origin: CA
Additional Resources
Our Price: $24.04 EA
Minimum Order QTY: 1
Item must be ordered in multiples of 1
Item must be ordered in multiples of 1