ProcessMeter™ the Ultimate Loop Calibration Multimeter with a 24V Loop Supply

The Fluke FLUKE-789 is a process meter with a minimum ac current measurement of 0.

• 24 V Loop power supply
• Very large dual display
• Enhanced backlight with 2 brightness settings
• HART mode setting with loop power and a built-in 25 ohm resistor
  

• Product Type: Process Meter
• Functions Measured: AC Voltage DC Voltage AC Current DC Current Resistance Frequency Diode Test Continuity AC Current
• Display Type: Dual Large Display
• Power Source: Battery
• Maximum AC Current Measurement: 1A
• Minimum AC Current Measurement: 0A
• Maximum AC Voltage Measurement: 1000V
• Minimum AC Voltage Measurement: 400mV
• Maximum DC Current Measurement: 1A
• Minimum DC Current Measurement: 30mA
• Maximum DC Voltage Measurement: 1000V
• Minimum DC Voltage Measurement: 400mV
• Maximum Resistance Measurement: 40MΩ
• Minimum Resistance Measurement: 400Ω
• Best AC Current Accuracy: 1%
• Best AC Voltage Accuracy: 0.7%
• Best DC Current Accuracy: 0.2%
• Best DC Voltage Accuracy: 0.1%
• Best Resistance Measurement Accuracy: 0.2%
• AC Current Measurement Resolution: 1mA
• DC Current Measurement Resolution: 1mA
• Battery Type: 9 V Alkaline Battery
• Safety Category: CAT III 1000 V CAT IV 600 V
• Dimensions: 8 x 3.94 x 1.97in
• Safety Category Level: CAT III CAT IV
• Width: 3.94in
• Minimum Operating Temperature: -20°C
• Height: 1.97in
• Length: 8in
• Model Number: FLUKE-789
• Maximum Operating Temperature: +55°C
• Safety Category Voltage: 1000 600V