FX-1003 Micro Tweezers for Hakko FX-100 Soldering Station

FX1003-84-3021 MFG #: FX1003-84
$242.27 / EA
Available to Order - 0 on Hand

The Hakko FX1003-84 are FX-1003 Induction Heating Micro Tweezers for micro SMD components. Designed for the Induction Heating FX-100 Soldering Station, these micro tweezers can handle components as small as 01005 (0402mm). The FX-1003 utilizes the new T38 Tips that have 2 different temperature ranges and 7 different shapes. Perfectly aligned tips with superior performance of the induction heating technology, the new HAKKO FX-1003 IH Micro Tweezers is the ideal tool for small component rework. Note: Tips sold separately

Hakko FX1003-84 Features:
  • The FX-1003 has 4 types of alignment adjustments: Vertical, Horizontal, Rotation, Length
  • T38 Tips temperature: 750°F and 660°F
  • The handpiece is designed with an ergonomic shape for comfort and is ESD safe
  • The holder can store spare tips and makes changing out hot tips easy and convenient
  • While resting in the holder the handpiece activates the FX-100's sleep mode to maximize tip life
Hakko FX1003-84 Specifications:
  • Part No: FX1003-84
  • Tip Series: T38-02: 750°F (400°C), T38-03: 660°F (350°C)
  • Type of Station: HAKKO Induction Heating Soldering Station
  • Tip to Ground Resistance: <2 Ω;;
  • Tip to Ground Potential: <2 mV
  • Output Frequency: 13.56 MHz
  • Heater: IH (High-Frequency Induction Heating)
  • Cord Length: 1.3 m (4.3 ft)
  • Total Length: 130 mm (5.1 in)
  • Weight: 32 g (0.07 lb)


HAKKO FX-1003 Micro Tweezer Holder

The holder itself is perfectly designed for the FX-1003 handpiece with a heat-resistant rubber iron cover with built-in tip-removal pads. The holder also comes with convenient tip storage pockets along the back to house unused tips. The holder comes with a traditional cleaning sponge as well as brass cleaning wire. The optional cleaning brush is also a good alternative for fine point and bent shaped tips.



T38 Tip Series

The FX-1003 Micro Tweezers use NEW T38 series tips with a variety of shapes capable of working on components as small as 01005. Due to using induction heating, no calibration or temperature setting is required. The T38 tips are available in two temperature ranges: 02 for 750°F and 03 for 660°F. Working with such tiny components is critical and that’s why the FX-1003 handpiece is equipped with tip adjustment mechanisms, giving the user the ability to easily adjust the horizontal, vertical alignment, angle and tip length.