TriggerGrip™ Circuit Board Cleaning Station Kit with MCC-SPR Suprclean Flux Remover
Hisco #:MCC-CBCSK-34160
MFG #:MCC-CBCSK
Item must be ordered in multiples of 1
The MicroCare MCC-CBCSK is a TriggerGrip PCB Cleaning Kit that has you need to clean PCBs faster, better, safer and more economically. Simply connect the TriggerGrip PCB Cleaning Tool to a can of MicroCare aerosol cleaning fluid and start cleaning PCBs better, faster and more economically. Ideal for cleaning after rework and repair, especially with hard-to-clean lead-free materials. The TriggerGrip™ PCB Cleaning Tool ensures you perform all four steps necessary for successful cleaning — Wet, Scrub, Rinse, Dry. The cleaning power of the fresh, pure solvent is increased with the mechanical scrubbing action of the brush. Also known as the Solvent Miser, the TriggerGrip™ uses less cleaning fluid, slashing cleaning fluid consumption up to 50-66%. The SuprClean™ Heavy Duty Flux Remover cleans circuit boards thoroughly. Lint-free Wipes dry boards well without leaving fuzz behind. Plus, a bench mounting bracket safely keeps the can of cleaning fluid handy and ready-to-use. Special note: the cleaning fluid selection varies outside of North America to conform with local regulations. Custom versions are also available.
MicroCare MCC-CBCSK Features:- Fresh pure fluid dispenses with each pull of the trigger to clean and rinse away contaminants
- Cuts cleaning costs by emptying the can completely – no waste
- Patented design reduces cleaning fluid use by 66%
- Targets dirty areas and eliminates overspray
- Cleans in seconds, boosting productivity by 5-9%
- Improves the safety of the work environment by limiting annoying fumes
- Conductive so it enhances your ESD control program
- Brand: MicroCare
- Product Type: Circuit Board Cleaning Station
- Color: Clear
- Container Type: Aerosol
- Length: 12.25 in.
- Width: 9.5 in.
- Height: 4.0 in.
- Boiling Point: 41 °C / 106 °F
- Cleaning Strength: 110 (KB Value)
- Evaporation Rate: Fast
- Odor: Slight, Ether
- Percent Volatile: 100%
- Specific Gravity: 1.26
Product Description
The MicroCare MCC-CBCSK is a TriggerGrip PCB Cleaning Kit that has you need to clean PCBs faster, better, safer and more economically. Simply connect the TriggerGrip PCB Cleaning Tool to a can of MicroCare aerosol cleaning fluid and start cleaning PCBs better, faster and more economically. Ideal for cleaning after rework and repair, especially with hard-to-clean lead-free materials. The TriggerGrip™ PCB Cleaning Tool ensures you perform all four steps necessary for successful cleaning — Wet, Scrub, Rinse, Dry. The cleaning power of the fresh, pure solvent is increased with the mechanical scrubbing action of the brush. Also known as the Solvent Miser, the TriggerGrip™ uses less cleaning fluid, slashing cleaning fluid consumption up to 50-66%. The SuprClean™ Heavy Duty Flux Remover cleans circuit boards thoroughly. Lint-free Wipes dry boards well without leaving fuzz behind. Plus, a bench mounting bracket safely keeps the can of cleaning fluid handy and ready-to-use. Special note: the cleaning fluid selection varies outside of North America to conform with local regulations. Custom versions are also available.
MicroCare MCC-CBCSK Features:- Fresh pure fluid dispenses with each pull of the trigger to clean and rinse away contaminants
- Cuts cleaning costs by emptying the can completely – no waste
- Patented design reduces cleaning fluid use by 66%
- Targets dirty areas and eliminates overspray
- Cleans in seconds, boosting productivity by 5-9%
- Improves the safety of the work environment by limiting annoying fumes
- Conductive so it enhances your ESD control program
- Brand: MicroCare
- Product Type: Circuit Board Cleaning Station
- Color: Clear
- Container Type: Aerosol
- Length: 12.25 in.
- Width: 9.5 in.
- Height: 4.0 in.
- Boiling Point: 41 °C / 106 °F
- Cleaning Strength: 110 (KB Value)
- Evaporation Rate: Fast
- Odor: Slight, Ether
- Percent Volatile: 100%
- Specific Gravity: 1.26
Technical Information
Item must be ordered in multiples of 1