Products
Abrasives
Adhesives, Sealants, & Tapes
Benches & Seating
Chemicals & Cleaning Supplies
Cleaning & Laboratory
Electrical
Fasteners & Hardware
Hand & Power Tools
Janitorial & Office Supplies
Labeling & Identification
Lighting & Magnification
Material Handling & Storage
Motion Control & Fluid Power
Packaging & Shipping
Paints & Coatings
Safety & Personal Protection
Soldering & Rework
Static Control
Test & Measurement
- Shop By Market - Specials
- Shop By Market - Specials
Eliminate ESD and transport components safely with SCS shielding bags
Protect, ship and store critical components without the threat of ESD with anti-static shielding bags from SCS. With a complete range of options, SCS ESD bags are engineered to suit virtually any requirement.
Metal-In or Metal-Out?Metal-In or Metal-Out?
The ESD shielding bag you select depends heavily on your application type. Metal-in bags, otherwise known as “buried” metal bags, are generally more durable and are well-suited to most requirements. Metal-out bags, on the other hand, are engineered for low surface resistance in order to quickly dissipate a static charge. Both options are effective against the threat of ESD.
Helpful Resources
Which Series is Right for You?
Static Shielding Bag Selection Chart
| Product Details | Metal-In Static Shielding 1000 Series |
Metal-In Static Shielding 1300 Series |
Metal-In Static Shielding 81705 Series |
Metal-Out Static Shielding 1500 Series |
Metal-Out Static Shielding 2000 Series |
|---|---|---|---|---|---|
| Surface Resistance: Exterior (per ANSI/ESD STM11.11) |
1 x 104 to < 1 x 1011 ohms | 1 x 104 to < 1 x 1011 ohms | 1 x 1012 ohms/sq | 1 x 104 to < 1 x 1011 ohms | 1 x 104 to < 1 x 1011 ohms |
| Surface Resistance: Interior (per ANSI/ESD STM11.11) |
1 x 104 to < 1 x 1011 ohms | 1 x 104 to < 1 x 1011 ohms | ≥1 x 105 to < 1 x 1012 ohms/sq | 1 x 104 to < 1 x 1011 ohms | 1 x 104 to < 1 x 1011 ohms |
| ANSI/ESD S11.4 Level | Level 3 | Level 3 | Level 3 | Level 3 | Level 3 |
| Discharge Shielding Energy Test (per ANSI/ESD STM11.31) |
<10nJ | <20nJ | ≤10nJ | <10nJ | <10nJ |
| Thickness: Typical Value Nominal: ±10% (per MIL-STD 3010C 1003) |
0.0028" (0.071mm) | 0.0032" (0.0813mm) | 2.8 mils, 0.071mm ±10% | 0.0030" (0.0762mm) | 3.6 mils, 0.0914mm ±10% |
| Puncture Resistance - Average (per MIL-STD 3010C 2065) |
12 lbs | 22 lbs | 12 lbs, 53 N | 10 lbs | 20 lbs, 89 N |
| Seal Strength (per ASTM D882) |
11 lbs, 48 N | 15 lbs, 66 N | 12 lbs, 53 N | 14 lbs, 62 N | 20 lbs, 89 N |
| Tensile Strength (per ASTM D882) |
4600 PSI, 32 MPa | 8100 PSI, 55 MPa | 4600 PSI, 32 MPa | 4900 PSI, 34 MPa | 7800 PSI, 54 MPa |
| Non-corrosive (per FTSM 101C/4046) |
Pass | Pass | Pass | Pass | Pass |
| Silicone (ASTM E168) |
Not Detected | Not Detected | Not Detected | Not Detected | Not Detected |